Setting The Sound Level; Auto Sleep (Power) - Delta LTL-XL Manual

Retroreflectometer

Hide thumbs Also See for LTL-XL:

Table of Contents

The levels can be adjusted on a scale from 1 (lowest brightness) to 10. Press OK to activate

the function and use UP and DOWN to change the values. Press LEFT or BACK to store.

It is also possible to adjust the time before the light switch to dimmer mode from 5 to 120

seconds or set to OFF. The back-ground colour of the display can be switched off.

WARNING: Using high brightness will drain the battery faster!

Setting the sound level

button and select SETTINGS / SOUND. Select KEY CLICK or SOUNDS to set

Press the

the individual sound levels for key click and system sounds. Use the

set the level. Accept the setting by pressing the

To activate a highly audible beep when the instrument has finished measurement set BEEP to

OK-

ON by pushing the

Note:

The beep indicates that the measurement is taken and the instrument can be

removed from the road marking. Data processing can be on going after the

beep and after a moment the display is updated.

To save power the instrument can be setup to automatically change to Auto Sleep mode. The

Auto Sleep time can be set from 1 to 30 min. in intervals of 1 min. or it can be deactivated

(OFF). Press the ON/OFF button to wake up from sleep/standby.

button and select SETTINGS / POWER / AUTO SLEEP. Use

Press the

edit the auto turn sleep time. Press OK, LEFT or BACK to accept.

DELTA

button.

LTL-XL Retroreflectometer

OK-

button.

DOWN

button to

DOWN

and

Table of Contents