Table of Contents
Advertisement
SERIES ID
Working with series ID
The purpose of a series ID
The series ID is a label, for example the name of a road. Although measurements can be per-
formed without selecting a series ID, it is convenient to group (name) the measurements for
each geographical spot, road or part of a road for easier recognition. The series ID for such a
group of measurements will be saved in the log together with the measuring results. The ID
must be selected prior to the measurement.
The individual measurements in a group can further be labeled by selecting a road marking
pg. 29
icon (see
) corresponding to the actual road.
.
Activate
button and select: SERIES ID /
MENU
To use the series ID it must be activated. Press the
ACTIVATE SERIES. By pressing
OK
you can toggle between ON and OFF, to activate or deac-
HOME
tivate the series ID function. Press BACK or press the
button to return to the HOME
screen. When the series ID is off no ID is shown in the display.
Selecting a series ID
UP
LEFT
RIGHT
From the HOME screen press
. If necessary, use the
or
button to highlight the
OK
button. The SERIES ID menu is shown. Choose SELECT to ac-
road icon
. Press the
cess the available series ID.
OK
Press the
button to accept the name.
28
LTL-XL Retroreflectometer
DELTA
Advertisement
Table of Contents
