Running Sundata; Setting Up Your Pc's Com Port - Delta SS1-UM-1.05 User Manual

Running SunData

SunScan User Manual v 1.05
The program you will run is
diskette). This will be a quick test just to obtain the opening SunData screens on
your PC.
From DOS
Change to the directory on your hard disk which holds the
At the DOS prompt, type:
The opening SunData screen will appear. SunData is running. You should see a
starting plaque similar to this:
Press the Tab key (
then press to expose the first working screen (see below)
You will not see this starting plaque again, but you will always be able to choose
your screen mode from the system settings in the program.
The first working screen will look like this:
For the moment, ignore the connection instruction at the bottom of the screen,
because you need to tell your PC which

Setting up your PC's COM port

Press , then
Alt+S Y
The System Settings dialog box will appear:
Use the arrow keys to toggle between the
available port options.
COM
Press the key (
Tab
(You can also move there with
(which was in the
SUNDATA.EXE
SUNDATA then or
) to select either
<Color>
COM port to use for the SunScan Probe.
) twice to move to
<OK>
or
, Enter, Shift+Tab
directory on the
\PC
SUNDATA.EXE
Return or Enter to run it.
or ,
<Monochrome>
, then press
.)
Getting Started
file.
11