Table of Contents
Advertisement
Selecting a road marking icon
The purpose of a road marking icon.
The road marking icons are used as labels for the individual measurement corresponding to
the measured road marking and will be saved in the log together with the measuring result.
The icon will then be presented together with the corresponding measurement when viewing
the log or by using the RSC program (
There are 24 fixed icons to select from. Six of the icons can be programmed as individual pre-
see
sets for each series (
The procedure.
From the HOME screen press the
light the wanted icon. Pressing
UP
will return to the HOME screen without selecting a new icon.
Pressing the OK button will activate the selected icon. The selected icon is now shown in the
left side of the measuring field and the instrument is again ready for measuring.
Deactivating the profile icon.
Activating an already selected marking icon will cancel the activation and remove the icon
from the main display.
Setting the date and time
Date and time is always shown in the display. Every measurement taken is marked with the
date and time, so it is essential that the settings are correct.
button and select SETTINGS / DATE & TIME. Press
MENU
Press the
menu is shown.
Setting the time format
OK
when TIME FORMAT is highlighted and scroll between 12 and 24 hr format by push-
Press
ing the OK button.
Setting the date format
Navigate to DATE FORMAT and push OK
DELTA
see
pg. 30
pg.
30
) and will be ready for selection when a series is selected.
DOWN
button. Then use the
DOWN
steps through and displays the five icon rows. Pressing
LTL-XL Retroreflectometer
).
LEFT
OK
RIGHT
or
button to high-
and the time format sub
21
Advertisement
Table of Contents
