Page 1
Operator's Manual Supplement Lift Tools™ Material Carrier -2669 ™ -3369 ™ -4069 ™ ANSI/CSA Models First Edition First Printing Part No. 1288240GT...
Page 2
Note: These installation instructions only apply to the Genie models listed on the front cover. Symbol and Hazard Pictorials Definitions Material Carrier weighs 80 lbs/36 kg.
Page 3
First Edition • First Printing Operator's Manual Supplement Introduction Pre-operation Inspection Be sure that the operator’s, safety manual, responsibilities manual and any necessary supplements are complete, legible and in the storage container located in the platform. Be sure that all decals are legible and in place. ...
Page 4
Operator's Manual Supplement First Edition • First Printing Operating Instructions Operating Instructions Material Carrier Operation WARNING Tip-over hazard. The weight of the material carrier assembly Verify the material carrier assembly and and the load in the material installation instructions have been followed carrier will reduce the rated properly and that the material carriers are platform capacity of the machine...
Ratchet Repair any machine damage or malfunction before operating the machine. Components of Kit 1288239GT Before Starting Installation: Description Genie part Qty. Read, understand and obey the safety rules number and operating instructions in the appropriate U-bolt, 3/8-16 x 2 x 3, PLTD 131681GT operator's manual.
Page 6
Secure the base weldment to the post using within the perimeter of the main deck whether the provided retaining fasteners. Torque to the platform extension deck is retracted or 31 ft-lbs / 42 Nm. Genie part number extended. 1288629GT, 1256850GT, 1274172GT. WARNING Tip over hazard.
Page 7
First Edition • First Printing Operator's Manual Supplement Installation Instructions Deck Retracted 4 main deck 1 material carrier 5 extension deck 2 U-bolt and nylock flange nut 3 swing gate Part No. 1288240GT Lift Tools™ Material Carrier...
Page 8
Operator's Manual Supplement First Edition • First Printing Installation Instructions Deck Extended 1 material carrier 2 U-bolt and nylock flange nut 3 swing gate 4 main deck 5 extension deck Lift Tools™ Material Carrier Part No. 1288240GT...
Page 9
First Edition • First Printing Operator's Manual Supplement Installation Instructions Optional Location - Deck retracted Part No. 1288240GT Lift Tools™ Material Carrier...
Page 10
Operator's Manual Supplement First Edition • First Printing Installation Instructions Optional Locations - Deck Extended DANGER Tip-over hazard. Do not install more than one set of material carriers in the platform. The illustration represents the two possible locations the material carrier can be installed when the platform is extended.
Page 11
First Edition • First Printing Operator's Manual Supplement Installation Instructions This page intentionally left blank. Lift Tools ™ Material Carrier Part No. 1288240GT Operator's Manual Supplement First Edition • First Printing Part No. 1288240GT Lift Tools™ Material Carrier...