Genie GS-2669 IC Service And Repair Manual
  1. Manuals
  2. Brands
  3. Genie Manuals
  4. Scissor Lifts
  5. GS-2669 IC
  6. Service and repair manual

Genie GS-2669 IC Service And Repair Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Service and Repair Manual
GS
-2669 IC
™
GS
-3369 IC
™
GS
-4069 IC
™
Serial Number Range
from GS69F-18000
from GS69M-101
This manual includes:
Repair procedures
Fault Codes
Electrical and
Hydraulic Schematics
For detailed maintenance
procedures, refer to the
appropriate Maintenance
Manual for your machine.
Part No. 1306516GT
Rev A1
May 2022

Advertisement

Table of Contents
loading

Related Manuals for Genie GS-2669 IC

Summary of Contents for Genie GS-2669 IC

  • Page 1 Service and Repair Manual Serial Number Range -2669 IC ™ This manual includes: from GS69F-18000 Repair procedures from GS69M-101 -3369 IC ™ Fault Codes Electrical and -4069 IC ™ Hydraulic Schematics For detailed maintenance procedures, refer to the appropriate Maintenance Manual for your machine.

  • Page 2: Find A Manual For This Model

    Copyright © 2020 by Terex Corporation 1306516GT Rev A, May 2021 Second Edition, First Printing Genie is a registered trademark of Terex South Dakota, Inc. in the U.S.A. and many other countries. “GS” is a trademark of Terex South Dakota, Inc.

  • Page 3: Revision History

    May 2022 Service and Repair Manual Introduction Revision History Revision Date Section Procedure / Page / Description 5/2021 Initial Release Platform Overload Fault Codes 5/2022 Fault Codes Reference Examples: Electronic Version Section – Repair Procedure, 4-2 Click on any content or procedure in the Table of Contents to view Section –...
  • Page 4 Service and Repair Manual May 2022 Introduction Revision History (continued) Revision Date Section Procedure / Page / Description Reference Examples: Electronic Version Section – Repair Procedure, 4-2 Click on any content or procedure in the Table of Contents to view Section –...

  • Page 5: Serial Number Legend

    May 2022 Service and Repair Manual Introduction Serial Number Legend 1 Model 4 Serial label (located inside cover) 2 Facility code 5 Serial number (stamped on chassis) 3 Sequence number Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™...

  • Page 6: Safety Rules

    Service and Repair Manual May 2022 Safety Rules Secti on 1 Safety Rul es Danger Failure to obey the instructions and safety rules in this manual and the appropriate Operator's Manual on your machine will result in death or serious injury.
  • Page 7 May 2022 Service and Repair Manual Safety Rules Personal Safety Workplace Safety Any person working on or around a machine must Any person working on or around a machine must be aware of all known safety hazards. Personal be aware of all known safety hazards. Personal safety and the continued safe operation of the safety and the continued safe operation of the machine should be your top priority.

  • Page 8: Table Of Contents

    May 2022 Table of Contents Introduction Introduction ...................... ii Important Information ..................ii Find a Manual for this Model ................ii Revision History ....................iii Serial Number Legend ..................v Section 1 Safety Rules ....................vi General Safety Rules ..................vi Section 2 Specifications....................
  • Page 9 May 2022 Table of Contents Section 3 Repair Procedures ..................14 Introduction ...................... 14 Platform Controls ................... 16 1-1 Circuit Board ....................16 Platform Components ..................17 2-1 Platform...................... 17 2-2 Platform Extension Deck ................18 Scissor Components ..................20 3-1 Scissor Assembly, GS-2669 RT ..............
  • Page 10 May 2022 Table of Contents Kubota D1105 Engine ..................36 4-1 Timing Adjustment ..................36 4-2 Glow Plugs....................36 4-3 Engine RPM....................37 4-4 Flex Plate ....................38 How to Remove the Flex Plate ..............38 How to Install the Flex Plate ................ 38 4-5 Coolant Temperature and Oil Pressure Switches ........
  • Page 11 May 2022 Table of Contents GM .998L Engine .................... 47 7-1 Timing Adjustment ................. 47 7-2 Flex Plate ....................47 How to Remove the Flex Plate..............47 How to Install the Flex Plate ................ 47 Ground Controls ..................... 48 8-1 Auxiliary Platform Lowering ................ 48 8-2 Function Speed Tuning ................
  • Page 12 May 2022 Table of Contents Manifolds ......................64 10-1 Function Manifold Components ..............64 10-2 Valve Adjustments - Function Manifold ............. 66 How to Adjust the System Relief Valve ............66 How to Adjust the Oscillate Relief Valve ............67 How to Adjust the Platform Up Relief Valve - Models with Platform Overload ............
  • Page 13 May 2022 Table of Contents Steer Axle Components ................. 82 12-1 Yoke and Drive Motor ................82 How to Remove a Drive Motor ..............83 12-2 Steer Cylinder................... 83 12-3 Tie Rod ....................84 12-4 Oscillate Cylinder..................84 12-5 Oscillate Hoses ..................85 12-6 Oscillating Axle ..................
  • Page 14 May 2022 Table of Contents Section 5 Schematics ....................113 Introduction ....................113 Electrical Component and Wire Color Legends ..........114 Hydraulic Component Legend ................ 118 Electrical Symbols Legend ................120 Hydraulic Symbols Legend ................121 Limit Switch Legend ..................122 Electronic Control Module Pin-Out Legend .............

  • Page 15: Specifications

    May 2022 Service and Repair Manual Specifications Secti on 2 Specificatio ns Machine Specifications Castle nut (steer end) Castle nut torque, dry 300 ft-lbs Fluid capacities 406 Nm Hydraulic tank 16.5 gallons Castle nut torque, lubricated 225 ft-lbs (maximum fill capacity) 62.5 liters 305 Nm Hydraulic system (including tank)

  • Page 16: Performance Specifications

    Specifications Performance Specifications Hydraulic Oil Specifications Drive speed, maximum Hydraulic Fluid Specifications Platform stowed Genie specifications require hydraulic oils which are 3.5 mph High speed 5.6 km/h designed to give maximum protection to hydraulic 40 ft / 7.8 sec systems, have the ability to perform over a wide 12.2 m / 7.8 sec...
  • Page 17 May 2022 Service and Repair Manual Specifications Chevron Rando HD Premium Oil Do not top off with incompatible hydraulic fluids. Hydraulic fluids MV Fluid Properties may be incompatible due to the differences in base additive ISO Grade chemistry. When incompatible Viscosity index fluids are mixed, insoluble materials may form and deposit...
  • Page 18 Service and Repair Manual May 2022 Specifications Chevron 5606A Hydraulic Oil Petro-Canada Environ MV 46 Fluid Properties Fluid Properties ISO Grade ISO Grade Viscosity index Viscosity index Kinematic Viscosity Kinematic Viscosity cSt @ 200°F / 100°C cSt @ 200°F / 100°C cSt @ 104°F / 40°C 15.0 cSt @ 104°F / 40°C...
  • Page 19 May 2022 Service and Repair Manual Specifications UCON Hydrolube HP-5046 Fluid Properties ISO Grade Viscosity index Kinematic Viscosity cSt @ 149°F / 65°C cSt @ 104°F / 40°C cSt @ 0°F / -18°C 1300 Flash point None Pour point -81°F / -63°C Maximum continuous operating 189°F / 87°C temperature...

  • Page 20: Hydraulic Component Specifications

    Service and Repair Manual May 2022 Specifications Hydraulic Component Manifold Component Specifications Specifications Drive Pump Plug torque Type gear pump SAE No. 2 36 in-lbs / 4 Nm Displacement 1.0 cu in SAE No. 4 10 ft-lbs / 13 Nm per revolution 16 cc SAE No.

  • Page 21: Machine Component Weights

    May 2022 Service and Repair Manual Specifications Machine Component Weights GM Engine Models Platform assembly 936 lbs .998L 425 kg Low idle 1100 rpm Link assembly (GS-4069) 3430 lbs 36.6 Hz 1556 kg High idle 3000 rpm Link assembly (GS-3369) 2607 lbs 100 Hz 1183 kg...

  • Page 22: Kubota D1105-E3B Engine Specifications

    Service and Repair Manual May 2022 Specifications Kubota D1105-E3B Engine Fuel injection system Injection pump make Bosch MD Displacement 68.53 cu in Injection pump pressure, 1991 psi 1.123 liters maximum 137 bar Number of cylinders Injection timing 18° BTDC Bore and Stroke 3.07 x 3.09 inches Fuel requirement 78 x 78.4 mm...

  • Page 23: Kubota Wg-972 Engine Specifications

    May 2022 Service and Repair Manual Specifications Kubota WG-972 Engine Alternator output 40A @ 12V DC Fan belt deflection 0.28 to 0.35 in Displacement 57.8 cu in 7 to 9 mm 0.96 liters Starter motor Number of cylinders Brush length, new 0.551 in Bore and Stroke 2.93 x 2.90 inches...

  • Page 24: Perkins 403D-11 Engine Specifications

    Service and Repair Manual May 2022 Specifications Perkins 403D-11 Engine Unit ships with 15W-40. Extreme operating temperatures may require the use of alternative engine oils. For oil requirements, refer to the Engine Operator Displacement 69 cu in Manual for your engine. 1.13 liters Fuel injection system Number of cylinders...

  • Page 25: Hydraulic Hose And Fitting Torque Specifications

    Your machine is equipped with Parker Seal-Lok™ SAE Dash Size Torque ORFS or 37° JIC fittings and hose ends. Genie specifications require that fittings and hose ends 14 ft-lbs / 19 Nm be torqued to specification when they are removed...

  • Page 26: Torque Procedure

    Note: The O-ring in Parker Seal Lok™ fittings and hose end are custom-size O-rings. They are not standard size O-rings. They are available in the O- ring field service kit (Genie part number 49612). Lubricate the O-ring before installation. Be sure the O-ring face seal is seated and retained properly.
  • Page 27 May 2022 Service and Repair Manual Specifications Working clockwise on the body hex fitting, make a second mark with a permanent ink marker to indicate the proper tightening position. Refer to Illustration 2. Note: Use the JIC 37° Fitting table in this section to determine the correct number of flats, for the proper tightening position.

  • Page 28: Repair Procedures

    Be sure that all necessary tools and parts are  available and ready for use.  Use only Genie approved replacement parts.  Read each procedure completely and adhere to the instructions. Attempting shortcuts may produce hazardous conditions.
  • Page 29 May 2022 Service and Repair Manual Repair Procedures About This Section Symbols Legend Safety alert symbol—used to alert Most of the procedures in this section should only personnel to potential personal be performed by trained service professional in a injury hazards. Obey all safety suitably equipped workshop.

  • Page 30: Platform Controls

    Push in the red Emergency Stop button to the For further information or assistance, consult off position at both the ground and platform Genie Product Support. controls. Loosen the platform control box lid retaining fasteners. Open the control box and secure the control box lid in a level position.

  • Page 31: Platform Components

    May 2022 Service and Repair Manual Platform Components Remove the cover from the AC outlet. Tag and disconnect the wiring from the outlet. Platform Electrocution/burn hazard. Contact with electrically charged How to Remove the Platform circuits could result in death or serious injury.

  • Page 32: Platform Extension Deck

    Service and Repair Manual May 2022 Platform Components Carefully lift the platform enough to clear the platform pivot. Platform Extension Deck 10 Slide the platform towards the non-steer end of the machine until the slider blocks are How to Remove the Platform visible underneath the slider block channel.
  • Page 33 May 2022 Service and Repair Manual Platform Components Release the four rail spacers by pulling the Carefully slide the platform extension out and retaining pin and turn them in a downward away from the platform and place it on a position.

  • Page 34: Scissor Components

    Service and Repair Manual May 2022 Scissor Components Steer End Non-steer End 1 Platform pivot 10 Chassis pivot 2 Number 3 outer arm 11 Slider block (Qty. 2) 3 Lift cylinder rod-end pivot pin 12 Number 3 inner arm 4 Number 3 pivot pin (steer end) 13 Number 3 center pivot pin (Qty.

  • Page 35: Scissor Assembly, Gs-2669 Rt

    May 2022 Service and Repair Manual Scissor Components Using a suitable supporting device, attach a strap to the rod end of the lift cylinder. Do not Scissor Assembly, GS-2669 RT apply pressure. Remove the lift cylinder rod end pivot pin How to Disassemble the Scissor retaining fasteners.
  • Page 36 Service and Repair Manual May 2022 Scissor Components 13 Remove the retaining fasteners from the 20 Remove the two carriage bolts that secure the number 2 pivot pins. inner arm and chassis pivot to the steer end of the drive chassis. Note: Do not remove the external snap ring.
  • Page 37 May 2022 Service and Repair Manual Scissor Components Steer End Non-steer End 1 Platform pivot 13 Chassis pivot 2 Number 4 center pivot pin (Qty. 2) 14 Slider block (Qty. 2) 3 Number 4 pivot pin (steer end) 15 Number 4 inner arm 4 Number 3 center pivot pin (Qty.

  • Page 38: Scissor Assembly, Gs-3369 Rt

    Service and Repair Manual May 2022 Scissor Components Using an overhead supporting device attach a 4 hook sling chain to the ends of the number Scissor Assembly, GS-3369 RT 4 inner arm. Make the chains tight but do not apply lifting pressure. How to Disassemble the Scissor Crushing hazard.
  • Page 39 May 2022 Service and Repair Manual Scissor Components 13 Remove the retaining fasteners from the 21 Tag and disconnect the hydraulic hoses from number 3 pivot pins. the lift cylinder. Plug the hoses and cap the fittings. Note: Do not remove the external snap ring. Bodily injury hazard.
  • Page 40 Service and Repair Manual May 2022 Scissor Components Separate the link sets: Using an overhead supporting device attach a 4 hook sling chain to the ends of the inner arm. Make the chains tight but do not apply lifting pressure. Crushing hazard.
  • Page 41 May 2022 Service and Repair Manual Scissor Components Steer End Non-steer End 1 Platform pivot 16 Slider block (Qty. 2) 2 Number 5 center pivot pin (Qty. 2) 17 Number 5 inner arm 3 Number 5 pivot pin (steer end) 18 Number 5 outer arm 4 Number 4 center pivot pin (Qty.

  • Page 42: Scissor Assembly, Gs-4069 Rt

    Service and Repair Manual May 2022 Scissor Components Using an overhead supporting device attach a 4 hook sling chain to the ends of the number Scissor Assembly, GS-4069 RT 4 inner arm. Make the chains tight but do not apply lifting pressure. How to Disassemble the Scissor Crushing hazard.
  • Page 43 May 2022 Service and Repair Manual Scissor Components 13 Remove the retaining fasteners from the 22 Using a soft metal drift, remove the pivot pin. number 4 pivot pins. 23 Lower the lift cylinder and remove the strap. Note: Do not remove the external snap ring. 24 Using an overhead supporting device attach a 4 hook sling chain to the ends of the number 14 Using a soft metal drift, remove the pivot pins...
  • Page 44 Service and Repair Manual May 2022 Scissor Components Separate the link sets: 31 Carefully lift the linkage assembly off of the machine and place it on a structure capable of Using an overhead supporting device attach a supporting it. 4 hook sling chain to the ends of the inner 32 Tag and disconnect the harness from the arm.

  • Page 45: Wear Pads

    May 2022 Service and Repair Manual Scissor Components Remove the fasteners securing the ladder to the chassis. Remove the ladder from the Wear Pads machine and set aside. Crushing hazard. The ladder How to Replace the Scissor Arm could fall if not properly Wear Pad supported when the fasteners are removed from the machine.
  • Page 46 Service and Repair Manual May 2022 Scissor Components Remove the retaining fasteners from the Using a hard rubber mallet, secure the upper slider feet pivot pins and set aside. and lower wear pads to the slider feet. 1 upper wear pads 1 Slider foot assembly 2 slider foot 2 pivot pin...

  • Page 47: Lift Cylinders

    May 2022 Service and Repair Manual Scissor Components Lift Cylinders The lift cylinders are single acting hydraulic cylinders. The GS-2669 and GS-3369 uses one lift cylinder; the GS-4069 uses two. Each lift cylinder is equipped with a check valve to prevent movement in the event of a hydraulic line failure.
  • Page 48 Service and Repair Manual May 2022 Scissor Components Disassemble the scissor assembly. Refer to GS-4069 RT: Repair Procedure, How to Disassemble the Scissor Assembly. Bodily injury hazard. This procedure requires specific repair skills, lifting equipment and a suitable workshop. Attempting this procedure without these skills and tools could result in death or serious injury and...

  • Page 49: Height Angle Sensor

    May 2022 Service and Repair Manual Scissor Components Remove the retaining fasteners securing the angle sensor mount to the sensor housing. Height Angle Sensor Remove the sensor assembly and set aside. How to Re place the Heigh t Angle Senso r How to Replace the Height Angle Sensor Note: If the angle sensor is replaced, both the...

  • Page 50: Kubota D1105 Engine

    Kubota Workshop Manual. Connect the leads from an ohmmeter Kubota - D1105 between the far left glow plug and ground. Genie part number 229761 Result: The resistance should be approximately 1Ω. If the ohm reading is different than 1Ω, remove the wire and connector plate from the three individual glow plugs.

  • Page 51: Engine Rpm

    May 2022 Service and Repair Manual Kubota D1105 Engine Move the engine idle control switch to high idle (rabbit symbol) from the ground controls. Engine RPM Hold the start toggle switch to the start position and check the engine RPM on the How to Adjust the RPM diagnostic display.

  • Page 52: Flex Plate

    Service and Repair Manual May 2022 Kubota D1105 Engine How to I nstall t he Flex Plat e How to Install the Flex Plate Flex Plate Install the flex plate onto the flywheel with the raised spline toward the pump. The flex plate couples the engine to the pump.

  • Page 53: Coolant Temperature And Oil Pressure Switches

    May 2022 Service and Repair Manual Kubota D1105 Engine Tag and disconnect the wiring from the switch. Remove the switch from the engine. Coolant Temperature and Oil Pressure Switches The engine coolant temperature switch is a normally open switch. The switch contacts close at approximately 225°F / 107°C.

  • Page 54: How To Repair The Kubota D1105 Engine

    How to Repair the Kubota D1105 Engine Repair procedures and additional engine information are available in the Kubota Operator's and Workshop Manuals. Kubota - D1105 Operator's Manual Genie part number 131379 Kubota - D1105 Workshop Manual Genie part number 229761 ™...

  • Page 55: Kubota Wg972 Engine

    May 2022 Service and Repair Manual Kubota WG972 Engine Choke Adjustment Timing Adjustment The choke is solenoid-operated and functions only The ignition timing cannot be adjusted. The timing in the gasoline mode. The choke will not operate in adjustment screw is factory sealed with a tamper LPG mode.

  • Page 56: Engine Rpm

    Service and Repair Manual May 2022 Kubota WG972 Engine To correct the low idle speed, Loosen the core clamp screw so the cable moves freely. Engine RPM How to Adjust the RPM Note: The on-board self diagnostics incorporate a built-in engine tachometer. The engine rpm is displayed on the diagnostic display when the start button is held to the start position with the engine running.

  • Page 57: How To Repair The Kubota Wg972 Engine

    Do not tighten. Hold the throttle lever against the low idle Kubota - WG972 Operator's Manual adjustment screw and turn the adjustment Genie part number 234803 screw clockwise to increase rpm or Kubota - WG972 Workshop Manual counterclockwise to decrease rpm.

  • Page 58: Perkins 403D-11 Engine

    The engine coolant temperature switch is a normally open switch. The switch contacts close at Perkins 403D-11 Workshop Manual approximately 221°F / 105°C. If the coolant Genie part number 131662 temperature rises above the switch point, the switch contacts close and the engine will shut off to prevent damage.

  • Page 59: Engine Rpm

    May 2022 Service and Repair Manual Perkins 403D-11 Engine Coolant temperature switch: Tag and disconnect the wiring from the switch, located Engine RPM at the engine coolant outlet just above the alternator. Remove the switch from the How to Adjust the RPM engine.

  • Page 60: How To Repair The Perkins 403D-11 Engine

    Perkins - 403D-11 Operator's Manual turn the high idle adjustment nut and solenoid Genie part number 131661 boot counterclockwise to increase the rpm or clockwise to decrease the rpm. Tighten the Perkins - 403D-11 Workshop Manual yoke lock nut and recheck the rpm.

  • Page 61: Gm .998L Engine

    Complete information to perform this procedure is raised spline away from the flywheel. available in the GM .998L Workshop Manual. GM .998L Workshop Manual Genie part number 1280320GT Flex Plate The flex plate acts as a coupler between the engine and the pump. It is bolted to the engine flywheel and has a splined center to drive the pump.

  • Page 62: Ground Controls

    • High torque drive speed • Raised drive speed • Platform lift speed For further information or assistance, contact Genie Product Support. Tip-over hazard. Do not adjust the lift and/or drive speed higher than specified in this procedure. Setting drive speed greater than...

  • Page 63: How To Determine The Revision Level

    May 2022 Service and Repair Manual Ground Controls How to De ter mine the R evision Lev el How to Determine the Revision Press the lift function enable button. Level Press the yellow platform down button to decrease the drive speed or press the blue Turn the key switch to ground control and pull platform up button to increase the drive out the red Emergency Stop button to the on...

  • Page 64: How To Adjust The High Torque Drive Speed

    Service and Repair Manual May 2022 Ground Controls How to Adju st th e High To rqu e Driv e Spee d How to Adjust the Stowed High Press the yellow platform down button to decrease the drive speed or press the blue Torque Drive Speed platform up button to increase the drive speed.

  • Page 65: How To Adjust The Raised Drive Speed

    May 2022 Service and Repair Manual Ground Controls How to Adju st th e Raise d Driv e Spe ed How to Adjust the Raised Drive Press the yellow platform down button to decrease the drive speed or press the blue Speed platform up button to increase the drive speed.

  • Page 66: How To Adjust The Lift Speed

    Service and Repair Manual May 2022 Ground Controls How to Adju st th e Lift Spee d How to Adjust the Lift Speed Press the lift function enable button. Tip-over hazard. Do not adjust the lift and/or drive speed higher than specified in this procedure.

  • Page 67: Software Configuration

    May 2022 Service and Repair Manual Ground Controls ANSI and CSA models: Software Configuration Turn the key switch to ground control and pull out the red Emergency Stop button to the on position at both ground and platform controls. How to Configure the Software Result: The revision level of the ECM will The Electronic Control Module (ECM) contains appear in the LED display window.
  • Page 68 Service and Repair Manual May 2022 Ground Controls Press the lift function enable button. Models with platform overload (option): Use the yellow platform down arrow to scroll Result: DESCENT DELAY is showing in the to overload. diagnostic display window. Press the lift function enable button to activate or Result: OVERLOAD ON is showing in the deactivate the descent delay option.

  • Page 69: Level Sensor - Models Without Outriggers

    May 2022 Service and Repair Manual Ground Controls 11 Use the yellow platform down arrow to scroll to generator option. Level Sensor - Models without Result: GENERATOR ON is showing in the Outriggers diagnostic display window. Press the lift function enable button to activate or The Electronic Control Module (ECM) is deactivate the generator option.
  • Page 70 Service and Repair Manual May 2022 Ground Controls Locate the level sensor in the ground controls compartment. 1 ground control box 2 level sensor 1 "Y" indicator Tag and disconnect the wire harness from the 2 level sensor level sensor. 3 "X"...
  • Page 71 May 2022 Service and Repair Manual Ground Controls Center a lifting jack under the drive chassis at 21 Models with RT tires: Place a 2.15 x 10 x the ground controls side of the machine. 10 inch / 5.46 x 25 x 25 cm thick steel block under both wheels at the ground controls side 10 Raise the machine approximately 4 inches / of the machine.

  • Page 72: Level Sensor - Models With Outriggers

    Service and Repair Manual May 2022 Ground Controls Locate the level sensor in the ground controls compartment. Level Sensor - Models with Outriggers The Electronic Control Module (ECM) is programmed to deactivate the lift and drive functions and activate an alarm when a signal is received from the level sensor.
  • Page 73 May 2022 Service and Repair Manual Ground Controls Install the new level sensor onto the machine Connect the wire harness to the level sensor. with the "X" on the level sensor base towards Turn the key switch to platform controls and the steer end of the machine.
  • Page 74 Service and Repair Manual May 2022 Ground Controls Adjust the front-to-back axis: Confirm the side-to-side level sensor setting: 13 Without disconnecting the wire harness from 20 Center a lifting jack under the drive chassis at the level sensor, connect the positive lead of the ground controls side of the machine.
  • Page 75 May 2022 Service and Repair Manual Ground Controls Result: The platform stops raising and the tilt 42 Lower the platform to the stowed position. alarm will sound at 180 beeps per minute. 43 Raise the machine approximately 6 inches / Result: The platform does not stop raising and 15 cm.

  • Page 76: Hydraulic Pump

    Service and Repair Manual May 2022 Hydraulic Pump How to Re mov e th e Hyd raulic Pu mp How to Remove the Hydraulic Pump Hydraulic Pump Tag, disconnect and plug the hydraulic hoses The hydraulic pump is a single section, gear-type on the pump.

  • Page 77: How To Prime The Pump

    May 2022 Service and Repair Manual Hydraulic Pump How to Pri me t he Pu mp How to Prime the Pump Component damage hazard. Be sure that the hydraulic tank shutoff valves are in the open position before priming the pump.

  • Page 78: Manifolds

    Service and Repair Manual May 2022 Manifolds 10-1 Function Manifold Components The function manifold is located inside the hydraulic tray. Index Schematic Description Function Torque Item Priority flow regulator,1 gpm / 3.8 L/min Oscillate circuit 25-30 ft-lbs / 34-41 Nm Solenoid valve, 2 position 2 way N.C.
  • Page 79 May 2022 Service and Repair Manual Manifolds Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...

  • Page 80: Valve Adjustments - Function Manifold

    Service and Repair Manual May 2022 Manifolds 10-2 Adjust the internal hex socket. Turn it clockwise to increase the pressure or Valve Adjustments - Function counterclockwise to decrease the pressure. Manifold Install the relief valve cap. Tip-over hazard. Do not adjust How to Adju st th e Syste m Relie f Valve How to Adjust the System Relief the relief valve higher than...

  • Page 81: How To Adjust The Oscillate Relief Valve

    May 2022 Service and Repair Manual Manifolds How to Adju st th e Oscillat e Relie f Valve How to Adjust the Oscillate Relief Adjust the internal hex socket. Turn it clockwise to increase the pressure or Valve counterclockwise to decrease the pressure. Install the relief valve cap.

  • Page 82: How To Adjust The Platform Up Relief Valve - Models With Platform Overload

    Service and Repair Manual May 2022 Manifolds How to Adju st th e Platfo rm U p Relie f Valve - M odels wi th Platf or m Ove rloa d How to Adjust the Platform Up Press the lift function enable button. Relief Valve - Models with Result: DESCENT DELAY is showing in the Platform Overload...
  • Page 83 May 2022 Service and Repair Manual Manifolds 16 Locate and disconnect the lift cylinder 23 Press and hold the lift function enable button pressure sensor harness. and press and hold the blue platform up button. Allow the platform to raise completely, then continue activating the lift function while observing the pressure reading on the pressure gauge.
  • Page 84 Service and Repair Manual May 2022 Manifolds 27 Lower the platform and remove the test 38 Press the lift function enable button. weights. Result: DESCENT DELAY is showing in the 28 Raise the platform approximately 10 feet / diagnostic display window. 3 m.

  • Page 85: Outrigger Manifold Components

    May 2022 Service and Repair Manual Manifolds 10-3 Outrigger Manifold Components The outrigger manifold is located beneath the hose cover panel on top of the drive chassis Index Schematic Description Function Torque Item Solenoid valve, 3 position 4 way NC Outriggers in / out 40 ft-lbs / 54 Nm Part No.

  • Page 86: Traction Manifold Components - View 1

    Service and Repair Manual May 2022 Manifolds 10-4 Traction Manifold Components - View 1 The traction manifold is located inside the hydraulic tray. Index Schematic Description Function Torque Item Solenoid Valve, 2 position 3 way Brake release 40 ft-lbs / 54 Nm Solenoid valve, 2 position 4 way Front motor isolate 50 ft-lbs / 68 Nm...
  • Page 87 May 2022 Service and Repair Manual Manifolds Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...

  • Page 88: Traction Manifold Components - View 2

    Service and Repair Manual May 2022 Manifolds 10-4 Traction Manifold Components - View 2 The traction manifold is located inside the hydraulic tray. Index Schematic Description Function Torque Item Orifice, 0.030 inch / .76 mm Brake circuit Orifice, 0.030 inch / .76 mm Two speed circuit Pressure reducing valve, Two-speed and brake circuit...
  • Page 89 May 2022 Service and Repair Manual Manifolds Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...

  • Page 90: Generator Manifold Components

    Service and Repair Manual May 2022 Manifolds 10-5 Generator Manifold Components The generator manifold is located above the function manifold. Index Schematic Description Function Torque Item Proportional solenoid valve Generator speed 33-37 ft-lbs / 45-50 Nm Relief valve, 2700 psi / 186 bar Generator circuit 20-25 ft-lbs / 27-34 Nm ™...

  • Page 91: Valve Coils

    May 2022 Service and Repair Manual Manifolds Valve Coil Resistance 10-6 Specification Valve Coils Note: The following coil resistance specifications How to Test a Coil are at an ambient temperature of 68°F / 20°C. As valve coil resistance is sensitive to changes in air A properly functioning coil provides an temperature, the coil resistance will typically electromotive force which operates the solenoid...
  • Page 92 6. Set a multimeter to read DC current. Resistor 10Ω Genie part number 27287 Note: The multimeter, when set to read DC current, should be capable of reading up to Note: The battery should read 9V DC or more 800 mA.

  • Page 93: How To Test The Coils Using The Test System Function

    May 2022 Service and Repair Manual Manifolds How to Test the C oils Using the Tes t Syste m F unctio n How to Test the Coils Using the Use the yellow platform down arrow to scroll to test system. Test System Function Result: TEST SYSTEM is showing in the The Electronic Control Module (ECM) contains...

  • Page 94: Fuel And Hydraulic Tanks

    Service and Repair Manual May 2022 Fuel and Hydraulic Tanks 11-1 Loosen the fuel tank mounting strap fastener. Pull the tank strap to the side. Fuel Tank Note: Do not remove the tank strap. How to Remove the Fuel Tank Remove the fuel tank from the machine.

  • Page 95: Hydraulic Tank

    May 2022 Service and Repair Manual Fuel and Hydraulic Tanks 11-2 Tag and disconnect the harnesses from the ground control box. Hydraulic Tank Remove the ground control box from the The primary functions of the hydraulic tank is to machine and set aside. cool, clean and deaerate the hydraulic fluid during Tag, disconnect and plug the hydraulic hoses operation.

  • Page 96: Steer Axle Components

    Service and Repair Manual May 2022 Steer Axle Components 12-1 Tag, disconnect and plug the hoses from the drive motor. Cap the fittings on the drive Yoke and Drive Motor motor. Bodily injury hazard. Spraying How to Remove the Yoke and hydraulic oil can penetrate and Drive Motor burn skin.

  • Page 97: How To Remove A Drive Motor

    May 2022 Service and Repair Manual Steer Axle Components How to Re mov e a D rive Moto r How to Remove a Drive Motor 12-2 Steer Cylinder Component damage hazard. Repairs to the motor should only be performed by an authorized How to Remove the Steer dealer.

  • Page 98: Tie Rod

    Service and Repair Manual May 2022 Steer Axle Components 12-3 12-4 Tie Rod Oscillate Cylinder How to Remove the Tie Rod How to Remove the Oscillate Cylinder Remove the rue ring from each tie rod clevis pin. Remove the clevis pins. Note: When removing a hose assembly or fitting, the O-ring (if equipped) on the fitting and/or hose Remove the tie rod.

  • Page 99: Oscillate Hoses

    May 2022 Service and Repair Manual Steer Axle Components 12-5 Tag and disconnect the connector with the red wire from the oscillate left coil (item A) Oscillate Hoses and the connector with the white wire from the oscillate right coil (item B) and set aside. Test the Oscillate Axle Hose Refer to illustration 2.
  • Page 100 Service and Repair Manual May 2022 Steer Axle Components Check the Steering Slowly drive the machine in a safe direction and activate steer right. Turn the key switch to platform control and Result: The right oscillate cylinder will extend pull out the red Emergency Stop button to the and the left oscillate cylinder will retract.

  • Page 101: Oscillating Axle

    May 2022 Service and Repair Manual Steer Axle Components 12-6 Oscillate Limit Switches LSALOS, LSALOO Oscillating Axle When elevated and driving if load is removed from the left rear wheel, LSALOS changes state How the Oscillating Axle interrupting power to the ECM (U5), connector J2- Functions A8 and sends 12V input power to the right oscillate valve Y94.

  • Page 102: Non-Steer Axle Components

    Service and Repair Manual May 2022 Non-steer Axle Components 13-1 Remove the drive motor / brake mounting fasteners. Drive Motor / Brake Assembly Remove the drive motor / brake assembly from the drive hub and remove from the How to Remove a Drive Motor / machine.

  • Page 103: Drive Hub

    May 2022 Service and Repair Manual Non-steer Axle Components 13-2 Raise the machine approximately 2 inches / 5 cm. Place blocks under the chassis for Drive Hub support. Crushing hazard. The chassis How to Remove a Drive Hub will fall if not properly supported. Component damage hazard.

  • Page 104: Outrigger Components

    Service and Repair Manual May 2022 Outrigger Components 14-1 Attach a lifting strap from an overhead crane to the barrel end of the outrigger cylinder for Outrigger Cylinder support. Do not apply any lifting pressure. Remove the outrigger mounting fasteners. How to Remove an Outrigger Slide the outrigger cylinder down and away Cylinder (if equipped)

  • Page 105: Platform Overload Components

    May 2022 Service and Repair Manual Platform Overload Components How to Calibrate the Platform How to Cali brat e th e Platf orm Ove rload Syste m Pull out the red Emergency Stop button at the ground controls and momentarily activate the Overload System calibration toggle switch in the up position 3 times.
  • Page 106 Service and Repair Manual May 2022 Platform Overload Components Confirm Calibration: Fully lower the platform to the stowed position. Add additional weight to the platform. When the platform is fully stowed, Model Additional weight momentarily activate the calibration toggle GS-2669 300 lbs switch in the up position to confirm.

  • Page 107: Platform Overload Recovery Message

    May 2022 Service and Repair Manual Platform Overload Components 15-2 Use the up or down buttons to scroll to Select Options. Platform Overload Recovery Message Press the lift function enable button. Use the up or down buttons to scroll to If the ground controls LCD screen displays Ovrld Overload Option.

  • Page 108: Down Limit Height

    Note: Perform this procedure on a firm, level surface with the machine in the stowed position Note: The default setting is 9.0%. unless otherwise instructed. Note: The Genie Tech Pro™ Link will be required ® to adjust the platform down limit height.

  • Page 109: Fault Codes

    May 2022 Service and Repair Manual Fault Codes Secti on 4 Fault C odes Before Troubleshooting: Read, understand and obey the safety rules  and operating instructions in the appropriate operator's manual on your machine. Be sure that all necessary tools and test ...

  • Page 110: About This Section

    Service and Repair Manual May 2022 Fault Codes About This Section When a malfunction is discovered, the fault code charts in this section will help a service professional pinpoint the cause of the problem. To use this section, basic hand tools and certain pieces of test equipment are required —...

  • Page 111: Control System Fault Codes

    May 2022 Service and Repair Manual Control System Fault Codes LED Diagnostic Readout The diagnostic readout displays numerical codes that provide information about the machine operating status and about malfunctions. The dot to the right of the numbers remain on when a fault code is displayed.
  • Page 112 Service and Repair Manual May 2022 Fault Codes System Ready LED Condition Result Solution INTERNAL ECU Internal ECM error. System shutdown. Replace ECM. FAULT PLATFORM ECU Platform/ECM System shutdown. Troubleshoot control cable OR FAULT communication error. troubleshoot platform controls. CHASSIS START Engine start button fault at Engine will not Replace ECM.
  • Page 113 May 2022 Service and Repair Manual Fault Codes System Ready LED Condition Result Solution PLATFORM Engine start button fault at Engine will not start. Troubleshoot button OR START SW platform controls. replace printed circuit board FAULT at platform controls. LEFT FRONT Left front outrigger enable Outriggers disabled.
  • Page 114 Service and Repair Manual May 2022 Fault Codes System Ready LED Condition Result Solution DRIVE COIL 2 Drive coil 2 (Y1A) fault. High speed drive Troubleshoot coil OR wiring. FAULT function will not operate. DRIVE COIL 3 Drive coil 3 (Y1B) fault. High speed drive Troubleshoot coil OR wiring.
  • Page 115 LOW ECU Low ECM voltage. System shutdown. Charge battery. VOLTAGE LOW ENGINE Low RPM. Engine idle RPM too Contact Genie Product low. Support. HIGH ENGINE High RPM. Engine RPM too Contact Genie Product high. Support. LEFT FRONT...

  • Page 116: Platform Overload Fault Codes

    Service and Repair Manual May 2022 Platform Overload Fault Codes Platform Overload Display 1 LCD screen 2 red LED The diagnostic readout displays numerical codes that provide information about height sensor, pressure sensor and platform overload malfunctions. The codes listed in the Fault Code Chart can aid in troubleshooting the machine by pinpointing the area or component affected.
  • Page 117 May 2022 Service and Repair Manual Platform Overload Fault Codes Error Source Error Type Condition Solution Name ID Name Height sensor 12 Value too high Output higher than • Check wiring normal. • Check 5V supply voltage • Shorted too high •...
  • Page 118 Service and Repair Manual May 2022 Platform Overload Fault Codes Error Source Error Type Condition Solution Name ID Name Height sensor 12 Value too high Output higher than • Check wiring normal. (Safety) • Check 5V supply voltage • Shorted too high •...
  • Page 119 May 2022 Service and Repair Manual Platform Overload Fault Codes Error Source Error Type Condition Solution Name ID Name Pressure sensor 12 Value too high Output higher than • Check wiring normal. • Check 5V supply voltage • Shorted too high •...
  • Page 120 Service and Repair Manual May 2022 Platform Overload Fault Codes Error Source Error Type Condition Solution Name ID Name SCON - Safety Primary and secondary micros in • Replace SCON controller the SCON detect an internal safety fault. 29 Software Primary and secondary •...

  • Page 121: How To Retrieve Engine Fault - Codes Gm .998L Models

    May 2022 Service and Repair Manual Platform Overload Fault Codes How to Retrieve Engine Fault Codes - GM .998L Models The emissions control system utilizes a diagnostic display located on the ground control box. A fault condition will be displayed for one of the following: The fault caused the engine to shut down or the fault is related to the exhaust gas oxygen (EGO) sensors.
  • Page 122 Service and Repair Manual May 2022 Fault Codes DTC Set 2 DTC Set 2 Description Description SPN-2/FMI-2 SPN-2/FMI-2 DTC 11: Intake cam / distributor position DTC 221: TPS1-2 higher than expected 520800 / 7 653/6 error DTC 16: Crank and/or cam no sync during DTC 222: TPS2 voltage low 636 / 8 520251 / 4...
  • Page 123 May 2022 Service and Repair Manual Fault Codes DTC Set 2 DTC Set 2 Description Description SPN-2 / FMI- SPN-2 / FMI- DTC 420: Catalyst inactive on gasoline (Bank DTC 1111: RPM above fuel rev limit level 520211 / 10 515 / 16 DTC 430: Catalyst inactive on gasoline (Bank DTC 1112: RPM above spark rev limit level...
  • Page 124 Service and Repair Manual May 2022 Fault Codes DTC Set 2 DTC Set 2 Description Description SPN-2 / FMI- SPN-2 / FMI-2 DTC 1315: Cylinder 5 misfire detected 1327 / 11 DTC 1543: AUX analog Pull-Up/Down 2 high voltage 520220 / 3 DTC 1316: Cylinder 6 misfire detected 1328 / 11 DTC 1544: AUX analog Pull-Up/Down 2 low voltage...
  • Page 125 May 2022 Service and Repair Manual Fault Codes DTC Set 2 DTC Set 2 Description Description SPN-2 / FMI-2 SPN-2 / FMI-2 DTC 1517: AUX analog Pull-Up 3 high DTC 1626: CAN-J1939 Tx fault 520218 / 3 639 / 12 voltage DTC 1518: AUX analog Pull-Up 3 low voltage 520218 / 4...
  • Page 126 Service and Repair Manual May 2022 Fault Codes DTC Set 2 DTC Set 2 Description Description SPN-2 / FMI- SPN-2 / FMI-2 DTC 2123: FPP1 voltage low 91 / 4 DTC 2328: Spark coil 10 primary shorted 1277 / 6 DTC 2125: FPP2 invalid voltage and 520250 / 31 DTC 2428: EGT temperature high 173 / 0...

  • Page 127: Schematics

    May 2022 Service and Repair Manual Schematics About This Section Secti on 5 Schematic s There are two groups of schematics in this section. Electrical Schematics Electrocution/burn hazard. Contact with electrically charged Observe and Obey: circuits could result in death or serious injury.

  • Page 128: Electrical Component And Wire Color Legends

    Service and Repair Manual May 2022 Electrical Component and Wire Color Legends Item Description Item Description Battery Control relay Engine start Button Ignition power Engine start High idle Engine start (platform) Horn Glow plug (platform) Oscillate float enable Choke (platform) CR10 Oscillate float disable High idle (platform)
  • Page 129 May 2022 Service and Repair Manual Electrical Component and Wire Color Legends Fuse Item Description 5 amp (VSW) Gauge 10 amp (ECM) Hour meter 15 amp (Fuel pump) Diagnostic display 20 amp (Ignition) Horn or alarm 5 amp (DEPR) Level sensor alarm (platform) 25 amp (Starter) Horn 20 amp (oil cooler option)
  • Page 130 Service and Repair Manual May 2022 Electrical Component and Wire Color Legends Item Description Item Description Terminal base (Ground controls terminal Motor or Pump strip) Oil cooler (option) Toggle switch Fuel pump motor TS18 Work light (option) Starter Electronic Component Fuel pump Circuit board (platform) Red emergency stop button...
  • Page 131 May 2022 Service and Repair Manual Electrical Component and Wire Color Legends Color Description Blue Black Brown Green Orange Purple White Yellow BL/RD Blue/Red BL/WH Blue/White BK/RD Black/Red OR/WH Orange/White RD/BK Red/Black RD/WH Red/White WH/BL White Blue WH/BK White/Black WH/RD White/Red WH/YL White/Yellow...

  • Page 132: Hydraulic Component Legend

    Service and Repair Manual May 2022 Hydraulic Component Legend Item Function 3 position, 4 way directional valve - outrigger cylinders extend/retract Proportional valve - controls flow to the generator (option) Relief valve - reduces high pressure in the generator (option) Flow regulator valve - controls flow to oscillate circuit 2 position, 2 way valve- oscillate float...
  • Page 133 May 2022 Service and Repair Manual Hydraulic Component Legend Item Function 2 position, 3 way valve - brake release 2 position, 4 way valve - blocks flow to the steer motors in high drive Bidirectional relief valve - drive circuit Needle valve - enables towing ability 3 position, 4 way valve - drive forward/reverse...

  • Page 134: Electrical Symbols Legend

    Service and Repair Manual May 2022 Electrical Symbols Legend Battery Motor Horn or alarm Flashing beacon Gauge Circuit breaker with Diode Coil with suppression Fuse with amperage amperage Level sensor Connection - no Circuits crossing no Quick disconnect Power relay terminal connection terminal...

  • Page 135: Hydraulic Symbols Legend

    May 2022 Service and Repair Manual Hydraulic Symbols Legend Orifice with size Check valve Cylinder, double acting Accumulator Pump, prime mover Pump, fixed displacement Priority flow regulator Needle valve (engine or motor) Solenoid operated Solenoid operated Solenoid operated Solenoid operated 3 position 4 way directional 3 position 5 way 2 position, 3 way directional...

  • Page 136: Limit Switch Legend

    Service and Repair Manual May 2022 Limit Switch Legend 1 left rear outrigger limit switch, LS14 5 right front outrigger limit switch, LS13 left front outrigger limit switch, LS12 (not 2 left axle oscillate limit switches, LSA10S shown) and LSA10SS 3 right rear outrigger limit switch, LS15 4 right axle oscillate limit switches, LSA20S and LSA20SS...

  • Page 137: Electronic Control Module Pin-Out Legend

    May 2022 Service and Repair Manual Electronic Control Module Pin-Out Legend Electronic Control Unit Pin Numbering - 36 pin connector Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...
  • Page 138 Service and Repair Manual May 2022 Electronic Control Module Pin-Out Legend J1 Connector J2 Connector Right turn Y3 (output) Down limit height TB-43 (input) Left turn Y4 (output) Down limit height TB-26 (input) Platform up Y8 output) (ANSI / CSA) Auxiliary down power (input) Brake Y2 (output) Auxiliary down relay CR72-86 (output)

  • Page 139: Ground Control Box

    May 2022 Service and Repair Manual Ground Control Box BN23 BN34 Bn32 BN29 BN33 BN91 BN30 BN31 BN35 CR62 CR71 CR72 C 102 C 17 CR10 C 78 C 77 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 4142 43 44 45 4647 48 49 50 5152 53 54 55 56 5758 Part No.

  • Page 140: Platform Control Box - All Models

    Service and Repair Manual May 2022 Schematics Power Relay Fuel Pump, Fuse - 15A Fuel Pump Relay DEPR, Fuse - 5A Starter Relay ECM, Fuse - 10A Alternator, Fuse - 60A Ignition, Fuse - 20A Empty Starter, Fuse - 25A VSW, Fuse - 5A ™...
  • Page 141 May 2022 Service and Repair Manual GM .998L Engine Wire Harness...

  • Page 142: Gm .998L Engine Wire Harness

    Service and Repair Manual May 2022 GM .998L Engine Wire Harness ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT Part No. 1306516GT...

  • Page 143: Control Panel Circuit Diagram

    May 2022 Service and Repair Manual Control Panel Circuit Diagram PLAT CHASSIS Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...
  • Page 144 Service and Repair Manual May 2022 Control Panel Circuit Diagram...

  • Page 145: Electrical Schematics - Ansi And Csa Models

    May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, GM .998L Models (ANSI / CSA)

  • Page 146: Electrical Schematic, Gs-69 Rt (Ansi / Csa) Gm .998L Models

    Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, GM .998L Models (ANSI / CSA) PLAT FUEL LEVEL CAN COMM. MODULE CHASSIS FUEL LEVEL SENSOR FUEL TANK 100 Ohm ™ -2669 RT • GS ™ -3369 RT • GS ™...
  • Page 147 May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, GM .998L Models (ANSI / CSA) Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...
  • Page 148 Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, GM .998L Models (ANSI / CSA)
  • Page 149 May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, GM .998L Models (ANSI / CSA)

  • Page 150: Electrical Schematic, Gs-69 Rt (Ansi / Csa) Gm .998L Models

    Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, GM .998L Models (ANSI / CSA) ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT Part No. 1306516GT...

  • Page 151: Electrical Schematic, Gs-69 Rt (Ansi / Csa) Diesel Models

    May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, Diesel Models (ANSI / CSA) PLAT FUEL LEVEL CAN COMM. MODULE CHASSIS FUEL LEVEL SENSOR FUEL TANK 100 Ohm Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™...
  • Page 152 Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, Diesel Models (ANSI / CSA)
  • Page 153 May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, Diesel Models (ANSI / CSA)
  • Page 154 Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, Diesel Models (ANSI / CSA) ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT Part No. 1306516GT...

  • Page 155: Electrical Schematic, Gs-69 Rt (Ansi / Csa) Diesel Models

    May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, Diesel Models (ANSI / CSA) Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...
  • Page 156 Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, Diesel Models (ANSI / CSA)

  • Page 157: Electrical Schematics - As And Ce Models

    May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, GM .998L Models (AS / CE)

  • Page 158: Electrical Schematic, Gs-69 Rt (As / Ce) Gm .998L Models

    Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, GM .998L Models (AS / CE) PLAT FUEL LEVEL CAN COMM. MODULE CHASSIS FUEL LEVEL SENSOR FUEL TANK 100 Ohm ™ -2669 RT • GS ™ -3369 RT • GS ™...
  • Page 159 May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, GM .998L Models (AS / CE) Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...
  • Page 160 Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, GM .998L Models (AS / CE)
  • Page 161 May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, GM .998L Models (AS / CE)

  • Page 162: Electrical Schematic, Gs-69 Rt (As / Ce) Gm .998L Models

    Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, GM .998L Models (AS / CE) ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT Part No. 1306516GT...

  • Page 163: Electrical Schematic, Gs-69 Rt (As / Ce) Diesel Models

    May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, Diesel Models (AS / CE) PLAT FUEL LEVEL CAN COMM. MODULE CHASSIS FUEL LEVEL SENSOR FUEL TANK 100 Ohm Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™...
  • Page 164 Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, Diesel Models (AS / CE)
  • Page 165 May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, Diesel Models (AS / CE)
  • Page 166 Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, Diesel Models (AS / CE) ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT Part No. 1306516GT...

  • Page 167: Electrical Schematic, Gs-69 Rt (As / Ce) Diesel Models

    May 2022 Service and Repair Manual Electrical Schematic, GS-69 RT, Diesel Models (AS / CE) Part No. 1306516GT ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT...
  • Page 168 Service and Repair Manual May 2022 Electrical Schematic, GS-69 RT, Diesel Models (AS / CE)

  • Page 169: Hydraulic Schematics - All Models

    May 2022 Service and Repair Manual Hydraulic Schematic, GS-69 RT...

  • Page 170: Hydraulic Schematic, Gs-69 Rt

    Service and Repair Manual May 2022 Hydraulic Schematic, GS-69 RT FLOWS ARE CALCULATED AT 3100RPM LOWER CYLINDER ORIFICE SIZE HS0252G GS™-26 69 R T • GS™-3 369 R T • GS™- 4069 RT Part No. 130 651 6GT Service a nd Re pair Ma nual May 2 022 ™...

This manual is also suitable for:

Gs-3369 icGs-4069 ic

Table of Contents