Appendix B - Optc7 Communication Interface Object Profiles; Identity Object; Table B-1: Identity Class (1) - Class Attributes (0 - Eaton DeviceNet User Manual

March 2004
Appendix B — OPTC7 Communication Interface Object Profiles
In the following list, names followed by an asterisk (*) are stored in the non-volatile of the
OPTC7 or drive and maintain their values after a power loss. All other settable attributes will
power up at their default values.

Identity Object

Class Code 0x01
Table B-1: Identity Class (1) — Class Attributes (0)
# Attribute Name
1 Revision
0x01
2 Max Instance
0x02
3 Number of
0x03 Instances
4 Optional attribute
0x04 list
5 Optional service
0x05 list
6 Max Class
0x06 Attribute ID
7 Max Instance
0x07 Attribute ID
176 Object Name
0xB0
180 Class Attribute
0xB4 List
186 Instance Attribute
0xBA List
190 Instance ID List
0xBE
MN04003005E
Services
Get_Attribute_Single
Get_Attribute_Single
Get_Attribute_Single
Get_Attribute_Single
Get_Attribute_Single
Get_Attribute_Single
Get_Attribute_Single
Get_Attribute_Single
Get Member,
CH_Get_Member
Get Member,
CH_Get_Member
Get Member,
CH_Get_Member
For more information visit: www.eatonelectrical.com
Default,
Minimum, Data
Maximum Type
1 C7
1
1
1 C7
1
1
1 C7
1
1
{1,176} A2 04 C7
{1,176} A1 01 C7
{1,176}
{1,16} A2 04 C7
{1,16} A1 01 C7
{1,16}
190 C7
190
190
176 C7
176
176
"Identity" DA
"Identity"
"Identity"
N/A A1 08 A2
N/A 06 C7 DA
N/A DA A1 01
C6
N/A A1 08 A2
N/A 06 C7 DA
N/A DA A1 01
C6
N/A A1 01 C7
N/A
N/A
DeviceNet Option Board User Manual
Description
Revision of this object
ASCII Name for the object Class
Each Element describes a class
attribute. The Array's elements are
structs as described in the semantics
section. Individual elements are
accessed using the Get Member
service.
Each Element describes an instance
attribute. The Array's elements are
structs as described in the semantics
section. Individual elements are
accessed using the Get Member
service.
Array of instance IDs supported by this
class
B-1