SPEEDLAN Installation and Operation User Guide
To modify the SNMP Access List, click Add, Delete, or Edit.
TIP
SNMP Setup
convention, this is the node's fully qualified Internet Domain name (e.g.,
"bridge20.speedlan.com").
System Location
•
This field should contain the physical location of this node. (e.g., "telephone closet, 3rd
floor").
Trap Host IP Address
•
This is the IP address of a network-connected host that is set up to receive SNMP Trap mes-
sages from this brouter. If you do not have an SNMP Trap Host, set this to 0.0.0.0.
Trap Host Password
•
This is the SNMP read/write password (community name) of the host that is set up to receive
SNMP Trap messages. This field is ignored if the Trap Host IP Address described above is
0.0.0.0.
SNMP IP Access List
•
You can optionally set up a list of networks, subnets, and hosts that are authorized to access
the brouter via SNMP .
9-3