SNMP Setup
Choose SNMP Setup from the Setup menu of the SPEEDLAN Configurator to set up SNMP .
9-2
Read Password
•
This is the read-only password used for SNMP support. It is the SNMP password needed to
read the Flash ROM Configuration and SNMP MIB variables. The factory-default value for
this variable is the string "public".
Read/Write Password
•
This is the read/write password used for SNMP support. It is the SNMP password needed to
write the Flash ROM configuration and SNMP MIB variables into the brouter. The string
should be set to a value that is known only by you. The factory-default value for this variable
is the string "public" and should be changed to a string known only to you.
System Contact
•
This field should contain the identification of the contact person for this SNMP-managed
node, together with information on how to contact this person.
System Name
•
This field should contain the administratively assigned name for this managed node. By
SPEEDLAN Installation and Operation User Guide
SNMP Setup