Wave NCBSLXE2 Installation And Operation User Manual page 45

SPEEDLAN Installation and Operation User Guide
Warning:
There is also an option to Deny non-encrypted Data. This feature is disabled by default and is
designed primarily for multipoint SPEEDLAN installations where it may not be necessary to run using
data encryption at all locations. If you enable this option, any data received by this brouter will not
be passed to the wired network interface.
Configuring SPEEDLAN
This setting must be set to the same value for the brouters that will be communicating
together. Failure to set them to the same value will prevent any communications from
taking place. For example, in order to use a multipoint link, you must use the same
Encryption setting on the base station and on the CPE brouter.
5-13