SPEEDLAN Installation and Operation User Guide
More Button - RIP Routing
Click this button on the IP Router Setup dialog box to enable RIP . Wave Wireless brouters support
what is known as RIP (Routing Information Protocol). RIP allows users to permit network equipment to
communicate with each other to handle the routing plan of your network. Select the appropriate
check boxes as described below:
IP-Router Setup
Send RIP Default Route
•
Enabling this feature instructs the brouter to inform the network (via RIP) that it is the default
router for that network. This feature should only be enabled if this brouter is the only
default router on the local network.
Send RIP Routes
•
Enabling this feature instructs the brouter to forward all route information gathered and
stored by this brouter through the interface(s) selected. This is normally used in conjunction
with Listen to RIP which instructs the brouter to gather RIP information from other RIP devices
on your network.
8-5