Table of Contents
Advertisement
7-24
6
Click Add to enter another IP address/port pair. The Input IP Address/Port Pair dialog
box appears.
7
Then enter the following information as appropriate. Then, click OK to close this dialog
box.
Public IP Address
•
This is the IP address for the outside network. All requests for a particular IP address
from the outside or public network will be translated to the appropriate private IP
address.
Public Port
•
This item will allow you to assign a particular port that you would like to have one of
the private IP addresses to be able to respond to. Here are a few of the more common
ports used:
FTP - 20 & 21
SMTP – 25
DNS – 53
HTTP – 80
NNTP - 119
Private Server IP Address
•
This is the IP address of the server or workstation (or computer) where you want to get
the "received message" for this port assignment.
Private Server Port
•
This is the port of where you want to have the server receive the messages.
8
Click Delete to permanently remove the IP address/port pair selected. Click Edit to modify
the IP address/port pair selected. Click OK. You will return to the Incoming Network
Address Translation Setup dialog box.
SPEEDLAN Installation and Operation User Guide
Setting Up the IP Addresses (IP Host Setup)
Advertisement
Table of Contents
