RF IDeas pcProx Plus User Manual page 32

Logical Unit ID: A user defined 16 bit Logic Unit ID to identify one device from another.
Beeper
Function
Enable Beep on Card Read
Beep Now
Long Beep(s)
The number value input area to the right of the Long Beep(s) box is designated for the number of
beeps to produce when the device is in use.
OEM Converter Board
Function
Beeper On (Output Active Low)
Relay On
32
Chapter 3 Software
Description
Check this to set the device to beep when a card is read.
Press to listen to the beep the reader will provide when in
use.
Check the box to configure a long beep of 375 msec. By
default the beep is set to a short beep of 125 msec. 2 long
beeps or 5 short beeps are allowed only
Description
Check this to turn the device beeper on.
Check this to activate the OEM board.