RF IDeas pcProx Plus User Manual page 21

Disconnect
Clicking the disconnect icon button commands the utility to disconnect from all devices connected
through any and all available port connections.
Once the utility disconnects from all available device connections, the Device List pull-down menu
and device model number are cleared from the Standard Configuration Area and the Output Test
Area will turn from green to gray. Additionally, the status bar will display a "Disconnected" message.
Status Bar
Message
Write Settings/Write Active
The Write Settings icon button prompts the utility to write the current defined configuration settings
to the device. Since the writing options differ between a single configuration device and a two
configuration device (pcProx Plus), the Write Settings icon will change depending on whether a single
or two configuration device is connected. When a two configuration device is connected, the icon text
will change to read "Write Active," as seen below.
21
Chapter 3 Software