With wiegand converters; usb & rs-232 configuration software for use with pcprox proximity readers, wiegand to xxx converters, andair id enroll contactless smart card read-only readers (56 pages)
Software business, school, or organization. III. Reader Setup IV. Configuring the Reader RF IDeas products are an integral part of a variety V. Troubleshooting of solutions in every market such as healthcare, manufacturing, government, enterprise and other markets. The number of applications is ever-increasing...
1. Connector Options There are two connector options available with the reader for data input and output. Connector Type Output Data Type USB Keystroke Virtual Com Port: ASCII or SDK ASCII The product you have purchased may need to be configured before use. The configuration software and support documents can be downloaded from our product support page at: http://www.rfideas.com/support/product-support The configuration section details the steps necessary to install the configuration utility software and update the...
If the reader has a DB9 connector, verify the correct COM port using Windows Device Manager. If your reader requires a custom configuration, refer to the pcProx Plus/pcProx Enroll Manual for detailed information on the configuring the reader. The manual is available at www.RFIDeas.com...
Page 5
RF IDeas shall not be liable the terms of this EULA; and (f) agree that RF IDeas reserves all rights not for losses due to failure of any of these products, or components of expressly granted.
Need help?
Do you have a question about the pcProx Plus and is the answer not in the manual?
Questions and answers