Menu Tool Bar - RF IDeas pcProx Plus User Manual

Menu Tool Bar

The Menu Tool Bar contains all the basic configuration options for the utility.
File
The file menu lists the options for Opening .Hwg and Saving .Hwg files.
Open .Hwg/.Hwg+ File: Opens either a .Hwg or .Hwg+ file. A .Hwg or .Hwg+ file contains all the
configuration settings for the reader. The utility comes with sample .Hwg/.Hwg+ files.
Save to .Hwg+ File: Saves the configuration settings to the reader.
What is a .Hwg/.Hwg+ file? There are two kinds of configuration files. There is a .Hwg file
and .Hwg+ file. A .Hwg file can only be created with previous pcProx application utility ver-
sion. A .Hwg+ file can only be saved using this new utility . A .Hwg+ can configure a pcProx
Plus reader as well as a single configuration reader.
Exit: Exits out of the entire utility
Connect
The connect menu provides options for device to utility connections.
Auto Connect to USB on Startup: Set as utility default connection. Through this connection the
utility searches for a USB connection on startup.
Auto Connect to Serial on Startup: With this selection, the utility searches for any available serial
connections on startup.
Auto Connect to Ethernet on Startup: Utility option to search for ethernet connections on startup.
Why use the Auto Connect feature? The utlity's auto connect features allow users to have
an easy auto connect through a specified port on startup.
Connect: This selection has the utility search for a device connection through all available port
connections.
Why use the Connect feature? The utlity's general connect option gives users the ability
to connect their device to the utility, without the user needing to identify the devices actual
interface connection. This feature cycles through all available ports until a device is found.
Note: For further information on the connect option, see the connect portion of the Icon
Toolbar section on page 19 of this manual.
14
Chapter 3 Software