Additional Warnings For Routers - Clarke CR4 Operation & Maintenance Instructions Manual

ADDITIONAL WARNINGS FOR ROUTERS

a. Do not start the router while the bit is touching the workpiece.
b. Make sure that the bit has stopped before engaging the spindle lock.
c. Do not touch the router bits immediately after use - they can be very
hot.
d. Make sure that the plunge spring is always fitted when using hand-held.
e. Only use router bits designed for woodwork and suitable for the speed
rating of this router.
f. Only use bits with a shank diameter exactly matched to the collet(s)
supplied with this router.
g. Extra precautions must be taken when using bits with a diameter
greater then 2" (50mm). Use very slow feed rates and/or multiple
shallow cuts to prevent the motor from overloading.
h. Always examine walls, floors and ceilings for hidden power cables and
pipes.
i. After long work periods external metal parts & accessories can be hot.
j. Handle router bits carefully, they can be extremely sharp.
k. Examine the bit carefully for signs of damage or cracks before use.
Replace damaged or cracked bits immediately.
l. Always use both handles and make sure that you have a firm grip on
the router before starting work.
m. Keep your hands away from the bit.
n. Before using the tool, switch on and let it run for a while. Look for
vibration or wobbling that could indicate an improperly installed bit.
o. Note the direction of rotation of the bit and the direction of feed.
p. Always switch off and wait until the bit has stopped before removing
the router from the work piece and also before putting the router down
on the workbench.
q. Make sure that you have removed foreign objects such as nails and
screws from the workpiece before starting.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
6