General Safety Rules; Work Area; Electrical Safety; Personal Safety - Clarke CR4 Operation & Maintenance Instructions Manual

GENERAL SAFETY RULES

1. WORK AREA

Keep the work area clean and well lit.
a.
accidents.
Do not operate power tools in explosive atmospheres, such as in the
b.
presence of flammable liquids, gases or dust.
which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool.
c.
Distractions can cause you to lose control.

2. ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any
a.
way. Do not use adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce the risk of electric shock.
Do not expose power tools to rain or wet conditions.
b.
power tool will increase the risk of electric shock.
c. Do not abuse the cable. Never use the cable for carrying, pulling or
unplugging the power tool. Keep the cable away from heat, oil, sharp
edges or moving parts. Damaged or entangled cables increase the risk
of electric shock.
When operating a power tool outdoors, use an extension cable suitable
d.
for outdoor use
electric shock.
e. Remove the plug from the socket before carrying out any adjustment,
servicing or maintenance.
f. Fully unwind cable drum extensions to prevent overheating.
When an extension cable is required, you must make sure that it has the
g.
right ampere rating for your power tool and is in a safe condition.

3. PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when
a.
operating a power tool.
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in personal injury.
Use safety equipment. Always wear eye protection.
b.
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Avoid accidental starting
c.
plugging in. Carrying power tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
. Use of a cable suitable for outdoor use reduces the risk of
Do not use a power tool while you are tired or under
. Ensure the switch is in the off position before
4
Cluttered and dark areas invite
Power tools create sparks
Water entering a
Safety equipment