Table of Contents
Advertisement
2. Device: PLC or other Ethernet devices
Step1.
Connect the Ethernet cable between computer and PLC
It needs to remove the Ethernet cable between device (PLC or other Ethernet devices) and
WF-2572. After that, you can connect the Ethernet to the computer.
Step2.
Execute WF-2572 utility
1. Click the "Get MAC" button after executing the WF-2572 utility.
2. Please fill in the IP address of the device (PLC or other Ethernet devices).
3. Click the "Get MAC" button.
Note: That the device and computer must be on the same network segment.
Figure 4-8. Computer's MAC
Figure 4-9. Query IP form PLC or other Ethernet devices
WF-2572, Ethernet to Wi-Fi Bridge (V1.00, 2018/09/30) 21
1
2
3
Advertisement
Table of Contents
