Table of Contents
Advertisement
x
Allow adequate ventilation around the adapter when using it to
operate the device or charging the battery. Do not cover the AC
adapter with paper or other objects that will reduce cooling. Do not
use the AC adapter while it is inside a carrying case.
x
Connect the adapter to a proper power source. The voltage and
grounding requirements are found on the product case and/or
packaging.
x
Do not use the adapter if the cord becomes damaged.
x
Do not attempt to service the Magellan Maestro 4000/4040/4050.
There are no serviceable parts inside. Replace the Magellan Maestro
4000/4040/4050 if it is damaged or exposed to excess moisture.
About the Battery
x
Do not attempt to replace the battery. Please contact Magellan
Technical Support for issues related to the battery.
x
Use the charger approved for your Magellan Maestro
4000/4040/4050.
IMPORTANT INSTRUCTIONS FOR SERVICE PERSONNEL ONLY:
x
Caution: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instruccions.
x
Replace only with the same or equivalent type recommended by
Magellan.
x
The battery must be recycled or disposed of properly.
x
Use the battery only in the specified equipment.
INSTRUCTION TO THE USER:
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
x
Reorient or relocate the receiving antenna.
x
Increase the separation between the equipment and receiver.
Advertisement
Table of Contents
