Magellan Maestro 4000 Instructions For Operating Manual page 29

5.1 Turning the Magellan Maestro 4000/4040/4050 On Out of the Box
Press the power button for approximately ten seconds (see "Front View" on
page 5). If power is connected properly or if the battery is charged
sufficiently, the Magellan screen will appear followed by the Warning
screen. To comply with the warnings, press OK. Next, the Quick Tips
screen will appear. It is recommended to view the Quick Tips to better
familiarize yourself with the functionality of the Magellan Maestro
4000/4040/4050. Otherwise, select ESC to skip viewing the Quick Tips at
this time. By default, the navigation application will launch and the
Destination screen will appear.
5.1.1 Power Off versus "Sleep" Mode
The Magellan Maestro 4000/4040/4050 can be
put into "sleep" mode. This mode is a limited
power mode that saves battery power. When
"waking up" from sleep mode, the time to
acquire a sattelite fix is significantly shorter than
when the Magellan Maestro 4000/4040/4050 is
powered up after being completely turned off.
To enable sleep mode, press and hold the Power button for 2-3 seconds. The
display will shut off and the power indicator light will be on dimly.
To power off completely, press and hold the Power button for 10 seconds.
The Magellan Maestro will be fully shut off.
To power up the Magellan Maestro 4000/4040/4050 from sleep mode, press
and hold the power button for 2-3 seconds. The Warning screen will appear.
Select OK and you will be taken to the last screen you were viewing.
5.1.2 Power Management
The Magellan Maestro 4000/4040/4050 can be configured to automatically
go into "sleep" mode after 20 minutes of no keys or touchscreen being
pressed. Press the MENU key on the Magellan Maestro 4000/4040/4050
then, select System Settings and select Power Management. Select the
Auto Power Off time and then, select OK. For more information on Power
Management, see "Power Management" on page 98.
5.2 Resetting the Magellan Maestro 4000/4040/4050
In the event the Magellan Maestro 4000/4040/4050 should stop responding,
press RESET button. If a route was active at the time the Magellan Maestro