Magellan Maestro 4000 Instructions For Operating Manual page 38

6.7 Choosing the Route Method
Every route is calculated based on the Route Method criteria selected. Every
time a new destination is selected, the Magellan Maestro 4000/4040/4050
prompts you for the method that will be used to calculate the route.
Shortest Time: This selection calculates a route that should take the least
amount of time using speed limits and other information in the database.
Other factors, such as traffic conditions, cannot be used in the calculation of
shortest time.
Shortest Distance: This option calculates the route using the most direct
route to the destination. This route may not be the fastest due to lower speed
limits, left turns or other factors.
Least Use of Freeways: This selection calculates the
route avoiding freeways whenever
possible.
Most Use of Freeways: This selection calculates the
route using freeways as much as possible. This option
will use toll
roads unless specified. See "Route Preferences" on page 61.
View Destination on Map: Before you select your Route Method, you can
see where you are going. Avoid Toll Roads: Check this option to calculate
your route without using toll roads.
6.8 Changing the Route Method
While routing and viewing the Map screen, the Maneuver List screen, or the
TrueView screen, press the ESCAPE key.
Select Route, then select the new route method.
The route will be re-calculated using the new Route Method chosen and the
Map screen will be
displayed. Press the VIEW key to see the Maneuver
List with the new route.
6.9 Cancelling a Planned Route
While viewing the Map screen, the Maneuver List
screen, or the TrueView screen, press the ESCAPE
key. Select Yes to cancel the route and display the
Destination screen.