Powering The Headphones - Sennheiser 502873 Instruction Manual

Powering the headphones

For powering the headphones, you can use:
• standard batteries (AAA size, 1.5 V)
• rechargeable batteries (AAA size, NiMH, 1.2 V, 600 mAh)
If you use rechargable batteries, you can charge them in the headphones
using the charging cable
Inserting rechargeable batteries/standard batteries into the
headphones and changing the rechargeable batteries/standard
batteries
·
Remove the ear pads
the direction of the arrow until you overcome a slight resistance.
·
Lift the ear pads off the ear cups.
·
Remove the depleted rechargeable batteries or batteries (where
applies).
Insert the rechargeable batteries or batteries. Observe correct polarity.
·
Secure the ear pads to the ear cups.
Putting the RS 160 into operation
(see next chapter).
from both ear cups by turning the ear pads in
·
15