Powering The Transmitter - Sennheiser 502873 Instruction Manual

Powering the transmitter

For powering the TR 160 transmitter, you can use:
• the supplied SSA-4P 5050F power supply unit for stationary use
• rechargeable batteries (AA size, NiMH, 1.2 V, at least 1,300 mAh) for
mobile use
• standard batteries (AA size, 1.5 V) for mobile use
Powering the transmitter via the power supply unit
Select the suitable country adapter
Slide the country adapter
into place.
7
Connect the connector
3
Plug the power supply unit
The transmitter switches on. The multi-function LED
1s
after 9 seconds. The transmitter is in enrollment mode.
You can also connect the charging cable
the power supply unit to conveniently charge your headphones
(see "Charging rechargeable batteries in the headphones" on
page 16 ).
0
for your wall socket.
onto the power supply unit
8
EU
of the power supply unit to the socket
9
into a wall socket.
Putting the RS 160 into operation
until it locks
UK US
AU
2
flashes green
to the connector
.
of
13