Samson TROVIS 5500 Mounting And Operating Instructions page 155

CO7: Device bus (all systems, F02, F03, ... only with CO7 -> F01 -1)
F Function
01 Device bus
02 Clock
synchronization
03 TROVIS 5570
Room Panel in Rk1
04 TROVIS 5570
Room Panel in Rk2
05 Reserved
06 Send value AF1
07 Receive value AF1
08 Send value AF2
09 Receive value AF2
10 Send flow set point
Rk1
11 Send flow set point
Rk2
12 Reserved
Comment
WE Anl Function block parameters / Range of values (default)
0 All CO7 -> F01 - 1: Device bus active
Function block parameter:
Device bus address /Auto*, 1 to 32 (32)
*Auto = controller automatically searches for free device bus
address in the system
0 All CO7 -> F02 - 1: Controller sends its time to all units con-
nected to the device bus every 24 hours
0 1.0–1.4, CO7 -> F03 - 1: Communication with TROVIS 5570 active
2.x, 4.x, for Rk1; CO1 -> F01 - 1 is set automatically
10.x, 11.x
Function block parameter:
Device bus address / Auto*, 1 to 32 (32)
*Auto = controller automatically searches for a room panel
for which detection mode has been activated
0 3.0-3.4, CO7 -> F04 - 1: Communication with TROVIS 5570 active
4.x, 10.x for Rk2; CO2 -> F01 - 1 is set automatically
Function block parameter:
Device bus address / Auto*, 1 to 32 (32)
*Auto = controller automatically searches for a room panel
for which detection mode has been activated
0 Not Anl CO7 -> F06 - 1: Function block parameter:
1.9 Register no. / 1 to 4 (1)
0 Not Anl CO7 -> F07 - 1: Function block parameter:
1.9 Register no. / 1 to 4 (1)
0 Not Anl CO7 -> F08 - 1: Function block parameter:
1.9 Register no. / 1 to 4 (2)
0 Not Anl CO7 -> F09 - 1: Function block parameter:
1.9 Register no. / 1 to 4 (2)
0 All CO7 -> F10 - 1: In systems Anl 1.5–1.8, 2.x, 3.1–3.4,
4.1–4.3, 7.x, 8.x, the storage tank charging set point is sent
during DHW heating
Function block parameter:
Register no. / 5 to 64 (5)
0 All CO7 -> F11 - 1: Function block parameter:
Register no. / 5 to 64 (5)
Appendix
155
EB 5576 EN