Service Mode; Cat (Computer Aided Test) Mode - Panasonic TH-103PF12E Service Manual

TH-103PF12E

6 Service Mode

6.1.

CAT (Computer Aided Test) mode

To exit the CAT m ode, access the ID mode and switch off the main power.
6.1.1. IIC mode
Select the IIC mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button on
the remote control.
OSD
1024x768/60Hz
16:9 DYNAMIC Hi
PANEL W/B Adj. <4-
R DRIVE
CO
-------------- Ж "
Subject and item are m entioned on "IIC mode structure".
To exit the IIC mode, press the R button on the remote control.
■ Subject
■ Item
<■
C 0 4 - ■ New data
■Original data
How to use the IIC mode.
1. Select the alignm ent S ubject by Up/Down
buttons on the remote control.
2. Select the alignm ent Item by Left/Right buttons
on the remote control.
3. A djust optim um setting by Volume Up/Down
buttons on the remote control.
4. The data is memorized when press the R button
on the remote control or change the alignm ent
Subject (or Items).
12