Table of Contents
Advertisement
2.3.1 Fquipnent Supplied
The tilt/swivel kit should
be
inspected for missing or damaged parts before
attempting installation.
Parts supplied are listed below.
ITEM
PART
NUMBER
NUMBER
DESCRIPTION
QUANTITY
1
07-W4472B01
Assenbly, tilt/swivel
1
2
03SW994D904
Screw, ph
il
1 ips,
4
MS x o.8 x 10
3
035W993D910
Screw, phillips,
4
M3.S x 0.6 x 10
2.3.2 Tilt/Swivel Assembly Installation
The user should read the following procedure canpletely before starting the
installation.
a.
Place control unit chassis in desired location.
b.
Position tilt/swivel assembly on control unit chassis as shown in
Figure 2-4.
c.
Install two, iten number 2, phillips MS x 0.8 x 10 screws as shown in
Figure 2-4.
d.
Position tilt/swivel assembly on control unit chassis as shown in
Figure 2-S.
e.
Install the ranaining two, iten number 2, phillips MS x 0.8 x 10
screws as shown in Figure 2-S.
f.
Lubricate tilt/swivel brackets as shown in Figure 2-6.
lubricant,
such
as
Lubriplate
number
23-2S
or
recomnended.
g.
Proceed to the display unit installation instructions.
2-4
An
al 1 purpose
equivalent,
is
Advertisement
Table of Contents
