Installation - Vulcan-Hart VICM24 Installation & Operation Manual

Table of Contents

Advertisement

INSTALLATION, OPERATION AND CARE OF
Cheesemelters are produced with quality workmanship and material. Proper installation,
usage and maintenance of your Cheesemelter will result in years of satisfactory
performance.
Model
VICM24-L / W ICM24-L
VICM36-L / W ICM36-L
VICM48-L / W ICM48-L
VICM60-L / W ICM60-L
VICM72-L / W ICM72-L
VICM24 / W ICM24
VICM36 / W ICM36
VICM48 / W ICM48
VICM60 / W ICM60
VICM72 / W ICM72
Before installing, verify that the t ype of gas (natural or propane) and the clearance
dimensions (see page 4) agree with the specifications on the rating plate . If the supply
and equipment requirements do not agree, do not proceed with the installation. Contact
your dealer immediately. It is recommended that a trained gas service technician with the
necessary tools, instruments and skills perform the installation of the cheesemelter
UNPACKING
This cheesemelter was inspected before leaving the factory. The carrier assumes full responsibility for
the safe delivery upon acceptance of the shipment. Check for possible shipping damage immediately
after receipt.
If the cheesemelter is found to be damaged, complete the following steps:
1.
Carrier must be notified within 5 business days of receipt.
Carrier's local terminal must be notified immediately upon discovery (note time, date, and
2.
who was spoken to), and follow up and confirm with written or electronic communication.
3.
All original packing materials must be kept for inspection purposes.
4.
The cheesemelter cannot have been moved, installed, or modified.
5.
Notify Vulcan Customer Service immediately at 800-814-2028.
Before using, remove all packaging material and protective plastic from the surfaces of
the unit. Carefully unpack your cheesemelter and make sure that no parts are discarded
with the packaging material. A pressure regulator designed to operate with the
cheesemelter has been supplied and must be installed before the cheesem elter is placed
into service. (Refer to GAS PRESSURE REGULATOR INSTALLATION in this manual).
CHEESEMELTERS
GENERAL
# of Burners
1
1
2
2
42,000 (1 @ 18,000 + 1 @ 24,000)
2
1
1
2
2
50,000 (1 @ 20,000 + 1 @ 30,000)
2

INSTALLATION

3
-
-
BTU/hr Input Rating
18,000
24,000
36,000 (2 @ 18,000)
48,000 (2 @ 24,000)
20,000
30,000
40,000 (2 @ 20,000)
60,000 (2 @ 30,000)
.

Advertisement

Table of Contents
loading

Table of Contents