Download  Print this page

Get Started; Install Battery; Connect Power; Set Time - Philips AJ3232 User Manual

Hide thumbs

Advertisement

3 Get started

Always follow the instructions in this chapter in
sequence.

Install battery

Caution
The batteries contain chemical substances, so they
should be disposed of properly.
Note
The batteries can only back up clock and alarm settings
when AC power is disconnected.
1
Open the battery compartment.
2
Insert two AAA batteries (not supplied)
with correct polarity (+/-) as illustrated.
3
Close the battery compartment.
6
EN

Connect power

Caution
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the radio.
Risk of electric shock! When you unplug the AC cord,
always pull the plug from the socket. Never pull the cord.
Connect the AC power plug to the wall socket.
Note
The display backlight is off when AC power is
disconnected.

Set time

Note
Make sure that the radio is in standby mode.
1
Press and hold SET TIME for two seconds
to activate clock setting mode.
" The hour and minute digits blink.
2
Press HOUR repeatedly to set hour.
3
Press MIN repeatedly to set minute.
4
Press SET TIME again to confirm.
" The set time is displayed.

Advertisement

   Related Manuals for Philips AJ3232

Comments to this Manuals

Symbols: 0
Latest comments:
  • M smith Jun 09, 2018 01:14:
    I am having difficulti​es setting ALL the presets for this clock radio
    How can I tell if it’s in standby mode
    How can I tell if it’s on am or fm
    Tried setting time and couldn’t​

    Are there some more detailed instructio​ns