Download  Print this page

Get Started; Connect Power; Plug And Set; Select Time Zone - Philips AJH510 User Manual

Hide thumbs

Advertisement

4 Get started

Always follow the instructions in this chapter in
sequence.

Connect power

Caution
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the alarm clock.
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Note
The type plate is located on the bottom of the alarm
clock.
Connect the AC adapter to the wall outlet.
Replace battery
Note
You can only use AC power as power supply. The pre-
installed lithium CR2032 battery can only back up clock
and alarm settings.
When power is disconnected, the display backlight is off.
When the low battery indicator
replace the battery as illustrated.
8
EN

Plug and set

Time has been preset at the factory. When
power is connected, the set time is displayed
automatically.
The built-in lithium battery can maintain clock
setting despite power interruption.

Select time zone

If the hour digits of the preset time do not
match your local time, you need adjust the time
zone settings.
1
2
3
is displayed,
Tip
Remove the battery if the alarm clock will not be in use
for a long period of time.
In standby mode, press TIME ZONE.
» The current time zone number blinks
on the display panel.
Rotate VOLUME +/- to select time zone
(-10 to -4 adjustable).
Press TIME ZONE to confirm the setting.

Advertisement

loading

  Related Manuals for Philips AJH510