Advertisement
8
Power supply
there is presence o
interrup on
its opera on.
9
Ex nguished re
minimum.
Lack of pellets or poor combu on process.
11
Poor heat
di erence between
exchange
and the water temperature.
12
Open door or
insu
clogged chimney
13
Fan failure
14
Unsuccessful
and
igni on
CLEANING AND MAINTENANCE
Prior to performing any opera
p
ons:
Make sure that there are no hot parts.
Make sure that the ash is completely cold.
Make sure that the plug has been removed from the wall-socket, in order to prevent any
accidental touching of live parts.
Follow the proper instruc ons for cleaning. Failure to comply with these instruc ons may create
problems. When cleaning, wear protec ve gloves.
To clean ash from the rebox oor and walls, and
all surfaces of the rebox, using mid-size normal
brush will be appropriate.
The most e cient and nal cleaning you can a ain
using a specialised vacuum cleaner for cleaning
stoves, with a container.
Lack of cleanliness may hinder star ng-up and the normal and e cient opera on of the stove.
Daily cleaning.
the power supply was restored,
, the stove con nues
Flame temperature drops below the
When there is a greater temperature
re box temperature
Ai
ow rate through the grate is
ient.
Open door / Clogged chimney
Failure in the pressure sensor.
Broken glass
Fan malfunc on
Fan speed sensor failure.
Damaged cable connec ons.
Occurs upon expiry of the ign on me
er two unsuccessful a empts.
Damaged heater
Incorrect se ngs. Poor quality of pellets
mode
the water jacket. Clean the chimney.
servicing, it is possible that it is clogged.
related to maintenance or cleaning
21
Leave the system to work.
Check for presence of pellets
Check the se ngs of the combus on
.
Upon re-occurrence, clean the pipes of
Close the door
Replace the glass
Check the chimney
Check the sensor and the controller.
If the fan was not cleaned during
Inspect the cable connec ons.
Clean the re box.
Check the heater
Check the se ngs
, take the following
.
Advertisement
