Download Print this page

Connection To The Chimney - PRITY PLW 20 Technical Description And Operating Instructions

With water heat exchanger

Advertisement

See the enclosed "DECLARATION OF PERFORMANCE".
All local, na onal and European standards must be observed during installa on and opera on of the
appliance.
The manufacturer shall bear no direct or indirect, civil or penal liability in cases of:
Failure to comply with the instru ons.
Failure to comply with the usual rules for safety.
Incorrect opera on of the appliance.
Poor maintenance.
In
on in contrad
In
on performed by unquali d or untrained personnel.
Modi ca ons and repairs, not regulated or approved by the manufacturer.
Usage of non-original spare parts.
Extraordinary events. Force-majeure.
It is appropriate that the appliance is posi oned in the largest and the most central room of the
resid
l unit. The par cular spot must be selected so as to conform with and meet the following
requirements:
Immediate proximity to the chimney.
Convenience for building a func onal, compact and aesthe c water hea ng system (pipes,
radiators and other components).
Opportunity for supply of external air.
Appropriate arrangement and orienta on so as to blend with the other furniture and opportunity
for watching the
In
on of the stove in a bedroom or kids' room is not recommended.
Su cient clearances of not less than 40cm around the stove to ensure convenience for opera on,
servicing, cleaning and preven ve maintenance.
The re safety requirements are obligatory.
Do not place any combus ble objects close to the stove.
The minimum clearances at the sides and back of the stove must be 40 cm.
The minimum clearance in front of the stove must be 100 cm.
Installa on of insula on and re-rated mat for the stove, in cases of ammable ooring. The mat
must be 20cm wider than the stove's sides, and it should extend 40cm in front of it.
The connec on of the stove to the chimney must guarantee ghtness, security of xing and
preven on of any re hazards.
Flue gases from the stove are discharged into chimney using sheet metal ue pipe (stove pipes).
During installa on, ghtness of connec on and structural stability must be guaranteed.
Usage of shared chimney shall not be allowed. The chimney must be dedicated to the stove and no
other appliances, even ones that are not currently used may ever be connected to it.
In some mu -family residen
constructed with special building structure, which is intended to be used by more than one appliance. If
this is the case, it must be veri ed that the working cond on of this chimney is good and the ue gases
from the stove cannot nd their way from the chimney into resid
The chimney must be fully air- ght and well heat-insulated.
LIABILITY
on with the standards in the country.
INSTALLATION. INSTALLATION ON SITE
ames.
FIRE SAFETY CLEARANCES

CONNECTION TO THE CHIMNEY

buildings there may be collec ve chimneys that are designed and
l or other rooms.
15

Advertisement

loading

This manual is also suitable for:

Plw 12Plw 27Kpw 20Plw18Plw11Plw35 ... Show all