Reviewing Caller Id Information - IBM -3345 Installation And Operation Manual

March 15, 2001 IBM-3345 (REV : 0.1)
OPERATION - continued
REVIEWING CALLER ID INFORMATION - continued
1. Make sure that the telephone is not in use, Press the Review Up ( ¡ ã ) or Review Down ( ¡ å )
button to review the incoming stored calls.
2. You will see new calls number and total calls number .
3. Press either Up or Down button to see the last call you receivd.
"END OF LIST"
4. When you have reached the end of the call records, the display will indicate confirming
there are no more calls stored in memory.
"END OF LIST"
5. If you want to review repeatedly after marked on the screen, press Up or Down button.
ERASING CALLS
Erasing individual calls: When reviewing calls, you can delete individual calls by pressing the Erase
button . The contents of the LCD display will be erased one at a time and the rest of the Caller –ID records
will be re-numbered.
Erasing all calls : When reviewing calls, you can release all call by pressing and holding the Erase button
"ALL ERASE ?"
for more than 3 seconds until appears in the LCD display.
22