March 15, 2001
INSTALLATION
SELECTING A LOCATION
Install the IBM-3345 base unit in a location that is near an AC power outlet and a modular telephone line
jack. The base's location effects the phone's range. Try several locations to see which provides the best
performance. Select a location that is away from, electrical machinery, electrical appliances, metal walls, filing
cabinets, wireless intercoms, security alarms, and room monitors.
GETTING STARTED
Unpack the unit and check to be sure you have all the items that come with your cordless telephone.
•
Telephone base
•
Remote keypad
•
Headset
•
Headset Holder
•
DC 9V Adaptor
•
Telephone line cord
CONNECTING THE TELEPHONE
Follow these steps to connect the IBM-3345 base unit to a source of AC power and to the telephone
line. (See Figure 5 and Figure 6)
1. Plug one end of the supplied modular telephone line cord into the TEL jack in the rear of the base unit.
2. Plug the remaining end of the telephone line cord into an existing modular telephone line jack.
3. Place the base unit antenna in a vertical position.
4. Put the headset holder into the slot on the back of the base and slide it into place.
5. Insert the power adapter cord plug into the DC 9V jack located in the rear of the base unit.
6.
Plug the adapter into an existing AC power outlet.
IBM-3345 (REV : 0.1)
11