Omron R88M-1L Series Startup Manual page 19

2.
Remove power connector(s) (CNA) or (CNA)/(CND) from the drive depending on
the model:
100V/200V (up to 1kW)
3.
Please wire the 24V control power supply
Connect wires with the spring opener
Please refer to the corresponding connector depending on your drive and power supply:
CNA for 100V/200V (up to 1kW)
4. Please wire the AC power supply
Please refer to the corresponding connector depending on your drive and AC power
supply type
1-Phase
3-Phase
100V/200V (up to 1kW)
200V (up to 1kW)
Example:
200V (1.5kW-3kW) 400V (0.6kW-3kW)
(stripped wires or ferrules can be used)
CND for 200V (1.5kW-3kW) 400V (0.6kW-3kW)
200V (1.5kW)
200V (1.5kW-3kW) 400V (0.6kW-3kW)
CNA) for 100V/200V (up to 1kW)
(
19