General Specifications - Klein Tools IR10 Instruction Manual

ENGLISH
Klein Tools IR10 is a professional dual-laser targeting infrared (IR)
thermometer. It offers a wide measurement range, a tight distance-
to-spot ratio, dual targeting lasers, and several calculation modes to
facilitate different temperature measurement applications. In addition
to measuring temperature using IR emission it can also measure
temperature using a standard K-type probe.
• Operating Altitude: 6562 ft. (2000 m)
• Relative Humidity: <85% non-condensing
• Operating Temp: 32° to 122°F (0° to 50°C)
• Storage Temp: -4° to 140°F (-20° to 60°C)
• Measurement Range: -40°F to 1200°F (-40°C to 650°C)
• Units: Settable to °F or °C
• Emissivity: 0.10-1.00 adjustable
• Optical Resolution (Distance-to-spot): 20:1
• Dimensions: 7" x 4.49" x 2.05" (178 x 114 x 52 mm)
• Weight: 9.1 oz. (256 g) including battery
• Battery Type: 1 x 9V battery
• Battery Life: (Estimates assume 9V alkaline battery)
• Display: Backlit LCD
• Display Resolution: 0.1°F (0.1° C)
• Calibration: Accurate for one year
• K-Type Probe: Included probe suitable for -40°F to 356°F
• Lasers: FDA and IEC Class II, <1mW each laser, 630-670nm
• Standards:
Conforms to IEC EN 61326-1:2013,EN608251:2014
Complies with: 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to laser notice No. 50, dated June 24, 2007
• Pollution Degree: 2
• Ingress Protection: IP54 dust & water resistant
• Drop Protection: 9.8 ft. (3m)
• Electromagnetic Environment: IEC EN 61326-1. This
equipment meets requirements for use in basic and controlled
electromagnetic environments like residential properties,
business premises, and light-industrial locations.
Specifications subject to change.
2

GENERAL SPECIFICATIONS

8 hours continuous infrared measurement
w/laser and backlight on
(-40°C to 180°C)