Certificate Settings - norbar TWC 400 AUTO Operator's Manual

Certificate Settings

This menu lets you configure the content of the calibration and conformance documents produced by the
TWC. You can change the company address, the logo, and customise the certificate numbering scheme.
Next Calibration / Next Conformance number: for traceability, each calibration or conformance document
is numbered, with the number increasing every time one is produced. You can set or change that number
here for both types of document.
Cal/Conf Number Format: This allows you to specify a more elaborate numbering scheme than just a flat
number by using format modifiers and text of your choosing:
%N – insert the calibration/conformance number. This is the default setting. Output will be "1", "2", "3" etc.
%Y – Insert the current year (lowercast %y enters short year, i.e. 18 for 2018)
%m – Insert the current month
%m – Insert the current day
You can combine these with other text to produce more elaborate numbering. For instance:
%Y-CAL-%N
Will produce:
"2018-CAL-1", "2018-CAL-2", "2018-CAL-3", etc.
When you save the format, you will see a preview of the output to be placed on the next document.
37