Table of Contents
Advertisement
Note:
•
The red dot showing next to the cooking zone power level indicator shows which cooking zone is
currently being controlled by the timer.
•
If you want to change the time after the timer is set, please start again from step 1.
Over-Temperature Protection
A temperature sensor measures the temperature underneath the glass. If an excessively high
temperature is observed, then the heating elements will be switched off automatically.
Residual Heat Warning
"H" will show which cooking zone is hot to touch. It will disappear
when the surface has cooled down to a safe temperature. It can
also be used as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
Note: Please be aware that the glass surface may still be warm for a while, even after the 'H' indicator
has disappeared.
Default working times
Another safety feature of the hob is automatic shutdown. This occurs whenever you forget to switch off
a cooking zone. The default shutdown times are shown in the table below:
Power level
Default working timer (hour)
1
2
3
8
8
8
13
4
5
6
7
4
4
4
2
8
9
2
2
Hide quick links:
Advertisement
Table of Contents
