System Properties - Fujitsu TeamPad500 System User Manual

3.2.1 System Properties

RAM usage can be updated from the System Properties function.
To activate this function, double tap the System icon on the control panel and tap the Memory tab.
[1] Memory area bar
The data storage area and program area in memory (RAM), are isolated from each other by
moving the bar. The bar can only be moved to the right of the default, reserving more of
the RAM for program execution. While the bar will automatically grow to the right, as an
application needs more memory, the bar will never automatically move to the left if more
storage area is needed. The primary purpose of this function is to provide a method to
guarantee a minimum amount of executable memory.
[2] OK Button
Apply the new RAM area memory allocation and return to the Control Panel.
[3] X Button
Cancel the RAM area memory allocation changes and return to the Control Panel.
Important
Do not update the memory area unnecessarily. Retain the default state. Otherwise, an application
program may not be able to run.
The memory area will return to the default state when data is erased in memory because of a dead
battery.
Copyright 2001 by Fujitsu-ICL Systems Inc.
13 of 47
TeamPad 500 User's Guide