11 - 2 GREASING AND RETIGHTENING THE BOLTS
Be sure to use the designated grease. Using undesignated grease can cause parts
damage.
Once every 6 months, apply greasing to
(Part No. 090 - 0025). Apply Spray Greasing to the Rod End and Bearing from the Grease
Nipple. At the same time, check to see if the nuts which secure
Rod End are loosened. If loosened, retighten the nuts.
FIG. 11. 2
69
a
f
~
mobile parts. Use Spray Grease
a
~
f
each bearing and
www.seuservice.com