Test Mode Writing; Position Pic-Adj - Sega WaveRunner Owner's Manual

STATIC CONVERGENCE ADJUSTMENT
In the static convergence adjustment, each of red and blue images is comprehensively moved to
and superimposed on the green color. If automatic color matching function is not sufficiently
satisfactory, perform this adjustment. Be sure to perform automatic color matching before
starting the above adjustment.
TEST MODE WRITING
R G B
PIC-ADJ
POSITION
RESET
ADJUST
SELECT
When either of 2 ~ 4
SELECT buttons (R, B) is pressed, if the
color desired to be adjusted disappears,
press that particular button again. For
example, if the red color needs to be
adjusted again at the stage of
button need to be pressed twice.
www.seuservice.com
P
SET
DO NOT PUSH THIS.
COLOR
4 , the R
1
Keep pressing the TEST button for
approximately 3 seconds.
The screen will change to
ADJUST MODE
ADJUST mode from the Game
mode to cause the green test
pattern to be displayed on the
screen.
2
Press the R button to have the red adjustment
mode.
The red test pattern is added to
ADJUST MODE
the display. The frame color
turns red and this signifies the
red adjustment mode.
3
Make adjustment by using the
ADJUST buttons.
Make adjustment so as to have
ADJUST MODE
red superimposed on green.
When red is superimposed on
green, the color becomes
yellow.
4
Press the B button to have the blue adjustment
mode.
Similarly as in the case of red,
ADJUST MODE
adjust the blue color. When
green, red, and blue are super-
imposed, the color becomes
white.
5
Press the WRITING button (for storing and finish).
The WRITING display appears
ADJUST MODE
and the adjustment data is
stored. After the data is stored,
the Game mode returns.
WRITING
92