Sega WaveRunner Owner's Manual page 37

( 3 ) SOUND TEST
SOUND TEST
RIGHT SPEAKER
LEFT SPEAKER
-> EXIT
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
( 4 ) INPUT TEST
INPUT TEST
HANDLE BAR
ROLL
THROTTLE LEVER
PITCH
START
VIEW
SAFETY SENSOR
SERVICE
TEST
PRESS TEST AND SERVICE BUTTON TO EXIT
( 5 ) OUTPUT TEST
OUTPUT TEST
> START LAMP
VIEW LAMP
EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Perform the above inspections also at the time of monthly inspection.
www.seuservice.com
In the test mode, selecting SOUND TEST
causes the screen (on which sound related BD
and wiring connections are tested) to be
displayed.
Be sure to check if the sound is satisfactorily
OFF
emitted from each speaker and the sound
OFF
volume is appropriate.
Selecting the INPUT TEST on the test mode
menu screen causes the screen (on which each
0H switch and V. R. are tested) to be displayed.
0H
Press each switch. If the display beside each
FFH
switch indicates "ON," the switch and wiring
0H
connections are satisfactory.
OFF
Check the display of each V.R. value. If the V.
OFF
R. is malfunctioning, refer to Sections 11 & 12.
OFF
OFF
OFF
In the output test mode, carry out lamp test to
ascertain that each lamp lights up satisfactorily.
OFF
OFF
28