Tools required for the work
Phillips type screwdriver (for M4, M5 screw)
24mm
WRENCH (for M16 hexagon bolt)
1
ASSEMBLING THE PTV
1
Fix the two mask holders onto the PTV top panel each with the 2 countersunk-head screws.
2
Insert the TV mask from the underside as illustrated below, and secure with a total of 6 screws.
3
Fix two PTV holders onto the PTV front side each with the 2 screws.
MASK
SCREW (4)
M5 X 20,
w/flat & spring washers
Box nut screwdriver (for M4 hexagon nut) or WRENCH
PTV
SCREW (2 each)
M5 X 16,w/flat & spring washers
17
KEY MASTER
COUNTERSUNK-HEAD SCREW (2 each)
M4 X 12
MASK HOLDER
TRUSS SCREW (2)
M5 X 25,flat washer used.
FIG. 6. 1 a
PTV HOLDER
www.seuservice.com