System Report; Restore Factory Defaults - American Standard AccuLink Platinum 1050 Installation Manual

Installation Guide
9.5

System report

The System Report Screen provides technicians with
important system operational data in one, concise screen.
The data is provided in real-time and updates as the data
changes. The tables below show the information available
for zoned and non-zoned systems.
SYSTEM REPORT SCREEN
FIELD NAME
System Name Name given to this 1050 Control.
Operation Status Current mode of operation
Operation Stage Current stage of operation
*Req Capacity Amount of capacity being requested
*Delv Comp Spd Percentage of compressor speed currently
operating
Load Value Numerical value used to determine how
much capacity is required to meet set point.
For more information see 6.2 Load Value.
Air Flow Current percent of air flow being delivered
(this value is only available for indoor units
with variable speed blowers operating in
cooling or compressor heating operation)
**Excess Air Amount of excess air currently calculated
ODT Current outdoor temperature (requires an
outdoor temperature sensor to be con-
nected and enabled)
**Static PSI Current static pressure being measured
**Return Air Temp Current temperature of return air
**Discharge Air Temp Current temperature of supply air
Humidifier Indicates current status of humidifier, if
installed
Dehumidifier Indicates current status of dehumidifier, if
installed
Ventilation Indicates current status of ventilation sys-
tem, if installed
28
DESCRIPTION
9.6

restore Factory Defaults

This feature will delete all saved settings, both user and
installer, and restore the 1050 Control to its factory default
settings. Z-Wave settings will not be cleared.
SYSTEM REPORT SCREEN - ADDITIONS FOR ZONING
FIELD NAME
Zone Name Displays enabled zones
Mode Indicates current mode per zone
Size Indicates air flow capacity per zone
Temp Current indoor temperature per zone
Cool Current cooling set point per zone
Heat Current heating set point per zone
Load Current load value per zone
RH Current indoor RH per zone
DMP Current damper position per zone
Sensor Indicates the indoor temperature sensor
type per zone
* Only applicable for systems with a VSPD outdoor unit
**Only applicable for zoned systems
DESCRIPTION
11-HD15D1-5-EN