General Maintenance - Eau de Vie EDV-TT-BP Installation And Operation Handbook

GENERAL MAINTENANCE

External cleaning of the machine
Use a soft cloth with a specific cleaning
product for stainless steel to clean the
machine. To remove lime-scale use a well
diluted, lightly acidic product (e.g. citric
acid). A high concentration of acid could
ruin the surface of the stainless steel.
Cleaning the supply spout
Spray a diluted solution of hydrogen
peroxide on the supply spout daily. (E.g.
Cooler clean)
Internal access
To have access inside the water cooler,
remove the top cover by unscrewing the
two screws on the back.
Pull back the top cover for 2 cm and
remove it.
Note: that there are three hooks on the
sides.
Sparkling water flow rate is pre-set. If
you want to adjust it, use the flow
control. Too much adjustment to the
outlet is not good for the sparkling water
quality. (5mm allen key required)
31