Eau de Vie EDV-TT-BP Installation And Operation Handbook page 19

INSTALLATION OF THE CO2 CYLINDER (FIZZ MODELS)
1. Once the water cooler has been connected to the mains water and electricity
supply and the ice bank has filled, you can go ahead with the installation of the
Co2 cylinder alimentary E290.
2. The machine comes with a Co2 pressure reducer with two gauges, but not with
the cylinder.
3. There is no storage space for the cylinder inside the machine.
4. Turn the screw (1) clockwise to increase the level of gas in the water. It is
recommended not to exceed 4 bar (2). To decrease the level of gas in the water
turn the screw anticlockwise, the level will diminish as soon as water is
supplied.
5. The water will only reach the ideal level of fizz once it has been well chilled,
which generally takes about an hour.
19