Fcc Compliance Statement; Technical Specifications - Beurer BF 70 Instructions For Use Manual

" " runs across the LCD.
or incorrect weight is displa-
yed.
or incorrect weight is displa-
yed.
Incorrect weight is displayed.
No Bluetooth connection
®
( symbol is missing).

11. FCC Compliance Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio fre-
quency energy, and if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

12. Technical Specifications

Battery type
Measuring range
Weight unit
Body fat, water, muscle percentage
Electrical current of B.I.A.
Fat percentage range
The fat percentage is outside the
measurable range (less than 3 %
or greater than 65 %).
The maximum load-bearing capa-
city of 400 lb (181.4 kg) was excee-
ded.
No flat, stable surface.
Not standing still.
Scale zero setting is incorrect.
Device outside the range.
User memory space is full. No
more measurements can be saved.
The batteries in the scale are empty. Replace the batteries of scale.
3 x 1.5 V AAA-size Alkaline Batteries
4 lb to 400 lb (2 kg to 181.4 kg)
0.2 lb increments (100 g)
unit 0.1 % increments
max. 5 μA / 1 V
5 % to 55 %
10
Repeat the measurement barefoot
or, if necessary, moisten the soles
of your feet slightly.
The load must not exceed 400 lb
(181.4 kg).
Place the scale on a flat, stable
surface.
Stand as still as possible.
Wait until the scale switches itself
off. Activate scale, wait for "0.0 lb"
to appear and repeat measure-
ment.
The minimum range in a free field
is approx. 82 ft (25 m). Walls and
ceilings reduce the range.
Other radio waves may interfere
with the transmission. Therefore,
do not position the scale near
devices such as WLAN routers,
microwaves, induction hobs etc.
Open the app. The data is trans-
ferred automatically. This may take
up to one minute.