Safety
For your safety, read all of the warnings and instruc-
tions in this manual, all system component manuals,
and the chemical manufacturer's literature before
installing or operating the equipment. The warnings,
cautions and instructions are designed to help all
operators use this equipment with safety and confi-
dence.
This gun has a trigger safety latch. To engage the
trigger safety latch (ON SAFE) and make the trigger
inoperative, pul out on the trigger safety latch (B) and
turn it so it is perpendicular to the gun body. To disen-
gage the trigger safety latch (OFF SAFE) turn it so it is
parallel to the gun body. See Fig. 2.
WARNING
To reduce the risk of serious bodily injury from
injection of high pressure fluid, always engage the
trigger safety latch (ON SAFE) whenever you stop
spraying and close the needle valves (C) complete-
ly with the nut driver (50).
Grounding
When used with Graco Heated Hose, this gun is
grounded through hose connections. For other types of
hoses, be sure the hose you use is static grounded, or
attach a grounding wire between a metal part of the
gun and a true earth ground.
Optional O-rings
This gun is supplied with flourocarbon o-rings (44)
installed in the gun check valves, for use with methy-
lene chloride solvent. A set of silicone o-rings (60) is
also included (not installed) for use with DMF (Dime-
thyl Formamide) and Cellosolver solvents.
Installation
C
Fig. 2
Trigger Safety (B)
shown in ON
SAFE position
Trigger Safety (B)
shown in OFF
SAFE position
307546
7