Ipevo VZ-X Quick Start Manual page 9

Connecting Wirelessly to Your Devices
4
Turn on your device's Wi-Fi. Browse the available Wi-Fi connections and connect to VZ-X's SSID.
The SSID can be found on the label located on the bottom of VZ-X.
5
Launch IPEVO Visualizer or IPEVO Whiteboard and choose VZ-X as your camera device.
A live image from VZ-X should appear on your device. VZ-X is now ready for use.
For more information on the features offered by IPEVO Visualizer and IPEVO Whiteboard,
Visualizer Whiteboard
please visit http://support.ipevo.com/visualizer or http://support.ipevo.com/whiteboard.
Launch
Note:
(1) VZ-X only supports 2.4GHz Wi-Fi network and not 5GHz.
(2) The effective range of VZ-X's wireless connection is 33ft (10m). However, the actual effective range may be
affected by environmental factors such as obstacles or other wireless signals. Please adjust the placement
accordingly to get the best streaming effect.
(3) The actual image transmission rate of VZ-X depends largely on the network environment it is used in. Having
multiple wireless signals in the same environment may cause interference and a drop in the transmission rate.
9