Ipevo VZ-X Manual

Hide thumbs Also See for VZ-X:

Experience wireless freedom with VZ-X while

maintaining internet connectivity

Connecting VZ-X to a computer or

device

Connect VZ-X wirelessly to your device in the ad-

hoc mode using its unique SSID located on the

bottom of its base. When using this method, the

connected device can't connect to the internet

wirelessly. However, it can still access the internet

via a wired connection.

Table of Contents

Need help?

Do you have a question about the VZ-X and is the answer not in the manual?

Page 1 Connecting VZ-X to a computer or device Connect VZ-X wirelessly to your device in the ad- hoc mode using its unique SSID located on the bottom of its base. When using this method, the connected device can't connect to the internet wirelessly.
Page 2 Plug the VZ cast for wirelessly casting to display devices anywhere Monitor Connecting VZ-X directly to a screen or projector via VZ Cast Dongle Connection via the VZ Cast dongle reduces signal interference and ensures smooth video streaming through a direct point-to-point connection. With a...
Page 3 Connecting to the LAN with VZ-X for an easy and stable connection Connecting VZ-X to a LAN Configure VZ-X for connection to your local area network (LAN). This allows maintaining a wireless internet connection on your computer.
Page 4 Connecting via a WiFi dongle Connect a WiFi dongle to your computer and Wi-Fi Connection then connect VZ-X using ad-hoc mode using its SSID. This allows the computer to maintain a wireless internet connection. Wi-Fi 2 *This way, you can skip configuring VZ-X for Connection connection to the campus/company network.